Menu
-
CAR PAINTINGS
-
PAINT AT HOME
- Varnishes for interior wood
- Exterior and marine varnishes for wood
- Exterior wood and deck stains and teak oils
- Enamels for Wood
- Furniture, kitchen cupboards and doors painting
- Chalk colour paint and chalk spray paint
- Anti termites treatments and woodworms protection
- Primers for Wood
- Wood putties
- Clean and Renovate Wood
- Furniture repair
-
PROFESSIONAL PAINT
-
BOAT PAINTING
-
CRAFTS
-
GARDEN
- COLD AND HEAT
-
HARDWARE
-
TOOLS
-
ELECTRICITY
-
PLUMBING AND GAS
- DECORATION
- ORDINATION
-
BATHROOM
- HOME
Search
Water Stain Remover Paint Titan
High water-based paint for interior covering, breathable and odorless. Especially recommended for Stubborn stains isolate Strong>walls and ceilings caused by nicotine, oils and cooking fats, smoke, soot, mold, rust, markers, halos of moisture, etc. No yellow.
You might also like
Related Products ( 3 other products in the same category )
Description
High water-based paint for interior covering, breathable and odorless. Especially recommended to isolate stubborn stains on walls and ceilings caused by nicotine, oils and cooking fats, smoke, soot, mold, rust, markers, halos of moisture, etc. No yellow.
Technical characteristics
- Matte finish
- White color
- Yield: 8 to 10 m² / Lt
- Drying: 30 - 60 minutes
- Repainting: 6 - 8 hours
- Method of application: roller and brush
- Dilution: ready to use, do not dilute
- Cleaning of tools: Water
- Layers: A layer
How to use
General recommendations:Stir in the package. The surfaces must be clean, dry and consistent. Do not dilute or mix with other paints.
Unprepared surfaces:On surfaces in poor condition: clean allaffected areas, removing all the material is not well bonded, consistent, cleaning all the dirt and dust that may have. To consolidate and standardize substrate porosity or tempera paints to tail, lime or surfaces where those have been removed: it is advisable to apply a first coat of sealer Fixer Water Fund or
Painted surfaces in good condition Span>: Apply undiluted paint directly after washing or brushing
Painted surfaces in poor condition:Completely remove the old paint and proceed as in unprepared surfaces.
Data sheet
- Kind of product:
- Finishing paint or final coat
- Degree of Brightness
- Mate
- Theoretical yield per hand (m2 / L):
- 8
- Number of recommended hands:
- one
- Dry to Touch at 23ºC and 60% RH
- 30 - 60 min
- Time for repainting at 23ºC and 60% RH
- 6 - 8 a.m.
- Diluent / Cleaning:
- Water
- Type Application:
- With brush or roller
- Place of application
- Interior Only
- Paint Iron or Steel
- Directly
- Paint Plaster or Putty
- Directly
- Paint Concrete or Cement
- Directly
- Paint Already Painted Surfaces
- Directly without sanding
- Danger for transport:
- Innocuous, without restrictions
Specific References
- ean13
- 8414800102697
Download
No customer questions for the moment.