Titan Sports Track Titan Volley

Titan Sports Tennis Forehand

30,95VAT included

Protective and decorative paint for interior and exterior flooring (concrete pavements, asphalt agglomerates, agglomerates of rubber) which provides the following qualities: High adhesion, high impact resistance, weather fastness, waterproof, quick drying, resistant to abrasion.

Size container
Colour
Selected color: Green 2380
Quantity DisponibilidadLast items in stock

You might also like

Related Products ( 2 other products in the same category )

Description

Protective and decorative paint for interior and exterior flooring (concrete pavements, asphalt agglomerates, agglomerates of rubber) which provides the following qualities: High adhesion, high impact resistance, weather fastness, waterproof, quick drying, resistant to abrasion.

Features

- Tennis Courts Cement and Asphalt agglomerates

- Great adhesion and hardness

- Controlled Slip

- Solid Colors light

Technical characteristics

- Nature: Acrylic

- Matte finish

- Color: Green & Red

- Yield: 8 to 12 m² / Lt

- Drying at 23 ° C and 60% RH: 30-60 minutes

- Repainting at 23 ° C and 60% RH: 6-8 hours

- Method of application: brush, roller or spray gun

- Dilution: Water

- Cleaning of tools: Water

- Layers: 2 layers

Mode empleor

General recommendations:Stir in the package. The surfaces must be clean, dry and consistent. The cement or concrete must be fully set (minimum 28 days). Preserving packaging freezing temperatures.

Unprepared surfaces:

-Surfaces in good condition:On surfaces in good condition, apply a first coat diluted with 10-15% water, apply a second undiluted.

- Surface in poor condition:clean up all affected areas, removing all the material is not well bonded and cleaning all the dirt and dust that may have. To consolidate and standardize substrate porosity: We recommend a first layer of Fund Fixer Fixer Water D13 or A16

Painted surfaces in good condition:Apply directly to the pre-wash or paint brush, diluting the first coat with 10-15% water, then apply the second layer as it is.

Surfaces already painted in a bad state:Completely remove the old paint and proceed as in unprepared surfaces.

8414800070668

Titanlux https://pinturas-dami.com/img/m/6.jpg

15738
2 Items

Data sheet

Kind of product:
Finishing paint or final coat
Degree of Brightness
Mate
Theoretical yield per hand (m2 / L):
8
Number of recommended hands:
two
Dry to Touch at 23ºC and 60% RH
30-60 min
Time for repainting at 23ºC and 60% RH
6 a.m.
First layer application
Dilute between 20-25% so that it penetrates well into the support
Diluent / Cleaning:
Water
Type Application:
By brush, roller or gun
Place of application
Interior and Exterior
Paint Concrete or Cement
Directly
Paint Fractated Concrete
Open pore and very dilute first coat
Paint Already Painted Surfaces
Directly without sanding
Danger for transport:
Innocuous, without restrictions

Specific References

ean13
8414800070668

No customer questions for the moment.


Your Question has been successfully sent our team. Thanks for question!
Ask a question
hide form
Captcha

New Account Register

Already have an account?
Log in instead Or Reset password