Rubber Antigoteras Moype
Coating against moisture seepage and exterior. Waterproof and elastic. To waterproof terraces, roofs, dividing walls, etc. Also to cover small cracks, and generally on surfaces where required waterproof support.
You might also like
Related Products ( 11 other products in the same category )
Description
Coating against moisture seepage and exterior. Waterproof and elastic.
Fields of application
Terraces, roofs, dividing walls, etc. Also to cover small cracks, and generally on surfaces where required waterproof support.
Technical characteristics
- Nature: Acrylic
- Finish: Satin
- Color: White and Red Oxide
- Performance: 1 m² / Lt
- Drying at 23 ° C and 60% RH: 6-8 hours
- Repainting at 23 ° C and 60% RH: 12 hours
- Method of application: Brush, roller
- Dilution: Water
- Cleaning of tools: Water
- Layers: 2 layers
How to use
New surfaces:Clean removing loose debris, check and correct the slopes or unevenness of the surface to be painted, to avoid possible flooding.
Old surfaces:Repaired with masonry if necessary. Surfaces must be clean and dry. Cement surfaces or waterproofed, directly apply 2 coats at least. On porous surfaces, dilute the first coat with 50% water, and finish with 2-3 cross layers, undiluted.
Apply a sufficient number of layers for the total yield of 2-2.5 Lt / m2, corresponding to the thickness of 1-1.2 mm., Minimum necessary to achieve complete sealing. On expansion joints or cracks of more than 1 mm., It is convenient reinforce them with a wide strip of elastic mesh, before the penultimate layer.
To increase the resistance of the coating to be stepped in terraces, roofs, etc., can sandwich a glass fiber cloth, extending on the penultimate layer Antigoteras wet. In this case elasticity is lost.
Data sheet
- Kind of product:
- Finishing paint or final coat
- Degree of Brightness
- Mate
- Theoretical yield per hand (m2 / L):
- 3
- Number of recommended hands:
- 3
- Dry to Touch at 23ºC and 60% RH
- 6-8 hours
- Time for repainting at 23ºC and 60% RH
- 12 noon
- First layer application
- Dilute between 20-25% so that it penetrates well into the support
- Diluent / Cleaning:
- Water
- Type Application:
- With brush or roller
- Place of application
- Only Exterior
- Paint Galvanized Steel
- Directly
- Paint Ceramic Surfaces
- Directly
- Paint Already Painted Surfaces
- Directly without sanding
- Danger for transport:
- Innocuous, without restrictions
- advice
- For total waterproofing and longer duration apply one coat of product, the fiber mesh and two finishing hands
Specific References
- ean13
- 8433459007078
No customer questions for the moment.