Top Coat ISO NEO White Leyser
The gel coat ISO NEO is a gel coat based on unsaturated polyester resin isophthalic neopentyl glycol. Its specific formula gives this gel, very good mechanical strength and good resistance to hydrolysis and aging outside. The Top Coat version comes wax for use as a topping.
You might also like
Related Products ( 7 other products in the same category )
Description
The gel coat ISO NEO is a gel coat based on unsaturated polyester resin isophthalic neopentyl glycol. Its specific formula gives this gel, the following properties:
-Good Mechanical strength
-good Resistance to hydrolysis and aging outside
TOP COAT: The Top Coat version comes paraffin for use as a topping.
Applications
The gelcoat is specially intended for the production of parts for the industry. It is preacelerado and requires only the addition of a catalyst to promote the polymerization reaction.
-The Manufacture of parts
-Construction Naval construction and automobile
-Panels For refrigerators and construction
Industrial -pieces
How to use
It must be removed entirely prior to use. For applications requiring the use of a solvent, adding a maximum of 10% acetone and eventually styrene.
The catalyst must be added MECK 50% and the amount of between 1.5 and 2.5%. The catalyst is included in the order.
The thickness of the applied gel coat should be approximately about 800 microns or less on the end use of the product manufactured.
Shop temperature, the gel coat and molds should be between 18 and 25 ° C, relative humidity should be less than 85%.
Gel time
The amount of catalyst and temperature determine the gel time. At 20 ° C, the gel time of the product to 100 parts of gelcoat and 2 parts catalyst is 9 to 11 minutes.
Data sheet
- Kind of product:
- Resin
- Degree of Brightness
- Satin
- Dry to Touch at 23ºC and 60% RH
- 60 min (thin layers)
- Diluent / Cleaning:
- Acetone
- Number of Components
- 2 components
- Mix ratio
- 2 g of catalyst per 100 g of resin
- Life of the mixture at 23ºC and 60% RH
- 11 minutes
- Type Application:
- By brush, roller or gun
- Place of application
- Interior and Exterior
- Paint Fiber Polyester
- Directly
- Paint Already Painted Surfaces
- Eliminate if the paint is of one component
- Danger for transport:
- Prohibited Air Transportation
- advice
- Do not make much amount of mixture since it reacts very fast
Es el producto adecuado para pintar el bajo de un kayak de mar de fibra de vidrio??
Hola Manel, lo puedes pintar con Gel Coat o con Esmalte de Poliuretano que quizá sea más sencillo de trabajar.