Leyser Top Coat ISO NEO White Leyser

Top Coat ISO NEO White Leyser

14,90VAT included

The gel coat ISO NEO is a gel coat based on unsaturated polyester resin isophthalic neopentyl glycol. Its specific formula gives this gel, very good mechanical strength and good resistance to hydrolysis and aging outside. The Top Coat version comes wax for use as a topping.

Size container
Quantity DisponibilidadLast items in stock

You might also like

Related Products ( 7 other products in the same category )

Description

The gel coat ISO NEO is a gel coat based on unsaturated polyester resin isophthalic neopentyl glycol. Its specific formula gives this gel, the following properties:

-Good Mechanical strength

-good Resistance to hydrolysis and aging outside

TOP COAT: The Top Coat version comes paraffin for use as a topping.

Applications

The gelcoat is specially intended for the production of parts for the industry. It is preacelerado and requires only the addition of a catalyst to promote the polymerization reaction.

-The Manufacture of parts

-Construction Naval construction and automobile

-Panels For refrigerators and construction

Industrial -pieces

How to use

It must be removed entirely prior to use. For applications requiring the use of a solvent, adding a maximum of 10% acetone and eventually styrene.

The catalyst must be added MECK 50% and the amount of between 1.5 and 2.5%. The catalyst is included in the order.

The thickness of the applied gel coat should be approximately about 800 microns or less on the end use of the product manufactured.

Shop temperature, the gel coat and molds should be between 18 and 25 ° C, relative humidity should be less than 85%.

Gel time

The amount of catalyst and temperature determine the gel time. At 20 ° C, the gel time of the product to 100 parts of gelcoat and 2 parts catalyst is 9 to 11 minutes.

Leyser https://pinturas-dami.com/img/m/39.jpg

18533
1 Items

Data sheet

Kind of product:
Resin
Degree of Brightness
Satin
Dry to Touch at 23ºC and 60% RH
60 min (thin layers)
Diluent / Cleaning:
Acetone
Number of Components
2 components
Mix ratio
2 g of catalyst per 100 g of resin
Life of the mixture at 23ºC and 60% RH
11 minutes
Type Application:
By brush, roller or gun
Place of application
Interior and Exterior
Paint Fiber Polyester
Directly
Paint Already Painted Surfaces
Eliminate if the paint is of one component
Danger for transport:
Prohibited Air Transportation
advice
Do not make much amount of mixture since it reacts very fast
From Manel | 2016-03-31 07:56:39

Es el producto adecuado para pintar el bajo de un kayak de mar de fibra de vidrio??

administrator

Hola Manel, lo puedes pintar con Gel Coat o con Esmalte de Poliuretano que quizá sea más sencillo de trabajar.

Page: 1

Your Question has been successfully sent our team. Thanks for question!
Ask a question
hide form
Captcha

New Account Register

Already have an account?
Log in instead Or Reset password