Titan Polylux 830 Titan Epoxy Primer

Titan 830 Epoxy Primer Polylux

90,00VAT included

Two component epoxy primer with low viscosity Strong>, Polyamide cured and formulated to effectively seal concrete surfaces, concrete. It has excellent penetration and hardening. Is the Polyurethane adequate basis for Polylux 840.

Size container
Selected color: 0003 grey
Quantity DisponibilidadLast items in stock


This combinations are out of stock

Choose one and enter your email to get a notification when it comes available

Create the alert to receive an email once we have stock back.

You might also like

Related Products ( 5 other products in the same category )


Two-component epoxy primer low viscosity polyamide cured and to effectively seal surfaces made of cement, concrete. It has excellent penetration and hardening. It is the appropriate basis for polyurethane Polylux 840.

Technical characteristics

- Finish: Satin

- Color: White and Black

- Performance: 1st layer: 5-7 m2 / l (70 μ dry), 2nd layer: 8-10 m2 / l (50-60 μ dry)

- Drying: 5 - 6 hours

- Second coat: Minimum: 2 hours, maximum: 2 days

- Mixing ratio: Base: 3 parts. Hardener: 1 part

- Pot Life at 23 ° C: 4 - 6 hours

- Method of application: Roller and Airless Spray

- Dilution: 1st coat Roller: 15-20%, 2nd coat: 0-5%. P. Airless: Maximum: 5%

- Thinner: Epoxy

- Layers: A layer. Film thickness 70-80 μ dry

How to use

General recommendations: Stir in the package. The surfaces must be dry, consistent and free from contaminants such as oil, grease, laitance, efflorescence, etc.

Unprepared surfaces:

-Cement or concrete: Strong>Must be fully set (minimum 28 days) and dry. Remove efflorescence or grout with pressurized water, allowing it to dry thoroughly before painting. If the surface is very smooth roughening by shot blasting, removing dust aspiration. Apply the primer layers necessary to the recommended thickness. Finally, apply the finish coat according to specifications.

-Other media:Consult.

Painted surfaces in poor condition:Remove stains of oil and grease, poorly adhering old paint and any other surface contaminants by mechanical systems, removing dust from aspiration. Then seal the unpainted areas with the primer preferably applied by brush. If land with poor adherence are very extensive, finish preparing a general hand primer.Finally, apply the finish coat according to specifications.


Titan Industrial https://pinturas-dami.com/img/m/71.jpg

2 Item

Data sheet

Kind of product:
Degree of Brightness
Theoretical yield per hand (m2 / L):
Number of recommended hands:
Sanding between layers
It is not necessary
Dry to Touch at 23ºC and 60% RH
5 h
Time for repainting at 23ºC and 60% RH
Minimum 2 hours, maximum 2 days
Diluent / Cleaning:
Epoxy solvent
Number of Components
2 components
Mix ratio
3 parts of paint per 1 of catalyst
Life of the mixture at 23ºC and 60% RH
4 h
Type Application:
Roller or Airless
Place of application
Interior Only
Paint Iron or Steel
Paint Fractated Concrete
Open pore and very dilute first coat
Paint Already Painted Surfaces
Sanding enough to open the pore
Danger for transport:
Prohibited Air Transportation

Specific References


No customer questions for the moment.

Your Question has been successfully sent our team. Thanks for question!
Ask a question
hide form

New Account Register

Already have an account?
Log in instead Or Reset password