TitanTech EPOXY SANITARY FLOORS AQ PXB-720 4 L TITANTECH

VIDEOS

EPOXY SANITARY FLOORS AQ PXB-720 4 L TITANTECH

157,60VAT included

Two-component, fast-drying, water-based epoxy paint for interior floors and pavements made of concrete, cement and other materials with good mechanical and chemical resistance.

Colour
Selected color: 0566 white
Quantity DisponibilidadLast items in stock

You might also like

Related Products ( 3 other products in the same category )

Description

Two-component, fast-drying, water-based epoxy paint for interior floors and pavements made of concrete, cement and other materials with good mechanical and chemical resistance.

Characteristic

- It can be applied on damp surfaces (humidity; 20%).

- Permeable to water vapor.

- Very low odor, allowing its use in schools, hospitals, slaughterhouses, hotels or in any area where the smell of solvent is a limitation.

Certifications

Reaction to Fire UNE EN 13501-1: Bfl-s1/on substrate A2-s1,d0 Surfaces for pedestrian circulation. Determination of resistance to sliding by the friction pendulum method. Test in wet. UNE 41901:2017 EX: Class 1 (16). With coarse corundum seeding in the first coat (50 g/m2) Classe 3 (64)

Technical data

  • Finish: Semi-gloss
  • Yield: 6 - 8 m2/l
  • Touch dry (min): 2 - 3 hours
  • Repainting (hours): 4 hours / Maximum 72 hours
  • Internal application: Yes
  • Application Methods: Brush and roller
  • Dyeing: TITANCOLOR Decoration System
  • Nature: Epoxy
  • Density: 1.40 - 1.50 Kg/l
  • VOC: 20g/l

How to use

RECOMMENDGENERAL INFORMATIONS:

Stir well in the container by mechanical agitation. The surfaces to be painted must be dry, consistent and clean of contaminants such as oils, grease, cement laitance, efflorescence, etc. Apply only when the pavement temperature is at least 3ºC higher than the dew point temperature. A 24 hour cure will be necessary to obtain resistance to light traffic. Chemical and mechanical resistance is obtained after curing for 7 days.

UNPREPARED SURFACES:

Cement or concrete: It must be completely set (minimum 28 days) and dry or slightly wet (it allows application with a concrete humidity of less than 5.5%). Remove efflorescence or laitance from the cement with pressurized water or preferably by milling or shot-blasting. If the surface is very smooth, roughen it by milling or shot-blasting, removing the dust by vacuuming. Apply the first coat diluted 15%. Let dry a minimum of 4 hours and finish with a second undiluted coat. Ensure air circulation during application and drying. Applications made with relative humidity lower than 15% or with a lack of air circulation can result in a floor with a lower gloss. If more than 3 days pass between coats, it will be necessary to open the pore before applying the AQ PXB720 Sanitary Floor Epoxy coat for heavy traffic situations.

MAINTENANCE OF ALREADY PAINTED SURFACES IN GOOD CONDITIONEITHER

Thoroughly clean all grease or oil residues using a pressurized fresh water jet or solvent. Before applying the Epoxi Suelos Sanitaria AQ PXB720, patch with it in the bare areas until reaching the level of the original thickness. Wait a minimum of 4 hours (at 23ºC) and apply two layers of this paint, leaving about 4 hours between them.

MAINTENANCE OF SURFACES ALREADY PAINTED IN POOR CONDITION

In the case of poorly adhered systems, they must be removed by scraping and/or brushing and proceed as on unprepared surfaces.

TitanTech https://pinturas-dami.com/img/m/479.jpg

22760
2 Items

Data sheet

Kind of product:
Finishing paint or final coat
Degree of Brightness
Semi-shine
Theoretical yield per hand (m2 / L):
5
Number of recommended hands:
two
Sanding between layers
It is not necessary
Dry to Touch at 23ºC and 60% RH
6-12 noon
Time for repainting at 23ºC and 60% RH
Minimum 24 hours, maximum 96 hours
First layer application
Dilute between 10-15% so that it penetrates well into the support
Time for maximum hardness
7 days
Diluent / Cleaning:
Water
Number of Components
2 components
Mix ratio
1 parts of A for 1 part of B
Life of the mixture at 23ºC and 60% RH
2 hours
Type Application:
With brush or roller
Place of application
Interior Only
Paint Wood
Directly
Paint Concrete or Cement
Dilute first hand
Paint Fractated Concrete
Open pore and very dilute first coat
Paint Already Painted Surfaces
Sanding enough to open the pore
Danger for transport:
Innocuous, without restrictions
Sanitary Certificate
Yes

No customer questions for the moment.


Your Question has been successfully sent our team. Thanks for question!
Ask a question
hide form
Captcha

New Account Register

Already have an account?
Log in instead Or Reset password