Description
Preparation anticorrosive fast drying for all types of surfaces. Corrosion on iron surfaces. Adherent Preparation: Zinc, aluminum, steel, brass, copper and zinc. Improves the adhesion on surfaces of hard PVC.
Technical characteristics
- Matte finish
- Colors: White and Gray
- Yield: 8 to 12 m² / Lt (depending on the material where applicable)
- Drying at 23 ° C and 60% RH: 30 minutes
- Repainting at 23 ° C and 60% RH: 2 hours or 24 hours to recoat with 2-component products.
- Layers: Apply a single coat of primer.
- Tools: brush, roller or spray.
- Cleaning of tools: universal solvent.
Surface treatment
General recommendations:Stir in the package. Surfaces to be primed must be clean, dry, degreased and deoxidized.
Surfaces not high schoolYou harbors:
-Steel:deoxidation using wire brush or sandpaper. Degrease and remove dust and debris from rust.
-Galvanized, PVC, zinc, brass, aluminum and coppercleaned with water and ammonia detergent. Lightly sanding the grip is improved. Apply one coat.
-Wood:sand the wood in the direction of the grain, clean thoroughly, remove resins or resin secretions and kill sharp edges. Apply 1 or 2 coats as absorption, sanding between coats if a smooth finish is desired. In woods outdoors, first apply Titanxyl Total 3. Protection can give second layers of primer or alkyd enamels after 2 hours. For finished products and polyurethane two component epoxy finishing must be carried out after 24 hours of application of the last layer of Preparation Multipurpose TITAN.
-Interior:apply 1 coat of TITAN Multipurpose preparation.-Foreign:Preparation apply 2 layer Purpose TITAN.
Maintenance painted surfaces in poor condition:Remove completely and proceed as in unprepared surfaces.