ULTIMATE GENERATION two-component Low Density Polyester putty that stands out for its easy application, fineness, absence of pores, high performance, filling power and above all, for its ease of sanding. Adhesion on steel, galvanized and electrozincado and previously sanded aluminum.
List of products by supplier Besa
The BESA-ROC is a Polyester Filler applied to a gun. Usable as a high-thickness filler backing for automotive repairs; Industrial Vehicle, Machine Tool, Isotherms, etc. "EXCLUSIVE USE IN INDUSTRIAL FACILITIES"
Acrylic varnish of 2 components to perform partial repairs with Bi-layer Systems. It stands out for its resistance to scratching, gasoline and good behavior to the exterior, as well as for its speed of drying and leveling. The finish that is achieved is the same as with conventional 2 c varnishes. of use with a gun. It has a deposit in the lower part that when activated mixes the two components to apply the varnish.
BESA-GLASS UHS Ultra High-Solids Varnish, for Bi-Coat Systems; It stands out for its very high non-volatile content at application viscosity, achieving more body, shine and enhanced metallic effect than with conventional products, complying with environmental legislation. Very good UV resistance. It is aimed at repainting the car in Bi-Layer Systems.
The URKI-FIB Putty, based on Fiberglass, is intended for the filling of dents, cracks, perforations or splinters in steel, cast iron or laminated Polyester-Fiberglass (GRP). Usable in the repair of car bodies and industrial vehicles, railway equipment, machinery, boats, etc. Also in the construction of models and prototypes where an easily moldable material with easy sanding is required. It stands out for its resistance, filling power, ease of application and sanding.
SPRAY URKI-DRY is an easy-sanding black acrylic paint used as a spray sanding guide to achieve a smooth and flawless surface. With hardly any drying time and avoiding the sagging of the sandpaper.
Phosphochromative primer of 1 c. of excellent adhesion on Steel. On Aluminum or Zinc plated we recommend previous proof. Its fast drying, its recointability with all kinds of finishes in wet-on-wet processes orients this product to those markets that require speed in the process. Suitable for Machine Tool, Industrial Bodywork, usable as a shop primer for its resistance to oxidation. Resistance is obtained in Salt fog of up to 300 hours when it is coated with PUR finishes. It can be dried at temperatures of 160ºC. It is weldable and does not give off toxic fumes.
Adhesion promoter for a wide variety of plastic parts in the automotive sector. garden furniture or other hard plastic objects. Applicable on the following types: PP, PUR, PS, PA, PP-EPDM, ABS, PVC, GRP, PC It is suitable for the application of patches and / or small surfaces. It is very easy to apply and allows high adhesion power on the indicated substrates.
Adhesion promoter for a wide variety of plastic parts in the automotive sector. garden furniture or other hard plastic objects. Applicable on the following types: PP, PUR, PS, PA, PP-EPDM, ABS, PVC, GRP, PC. It is suitable in the application of patches and / or small surfaces. It is very easy to apply and allows high adhesion power on the indicated substrates. The VOC content is 754 g / l (2004/42 / CE) IIB (E) (840).
URKISEAL 4020 is a black primer that transforms into a hard and opaque film once dry. It facilitates the adhesion of the Polyurethane Sealants and is usable on different substrates: glass, aluminum, concrete, wood and plastic. It can also be used as a barrier between sealant and paint to avoid migration of plasticizers.
URKI-2000 is a high quality polyester putty designed for use in body shops for the collection of faults and filling of dents. It stands out for its extraordinary ease of application, fineness, sanding, absence of pores and flexibility. Used on Steel, Casting, Polyester reinforced with fiberglass, Wood.
UHS express surfacer that has been formulated with totally innovative resins and indicated in partial quick repairs. It stands out for its covering and excellent sanding thanks to its hardening speed, and the vehicle can be sanded at 20-25 min. From the application without the need for energy expenditure of heat in the cabin or IR systems, which can generate significant savings in the painting cycle, as well as an increase in productivity.
Acrylic equipment used in repair processes for Industrial Vehicles, equipment and machinery in general. Applicable on primers, polyester putties or directly on sanded sheet. It presents great power of filling, equalization and speed of drying; easy to sand, which added to its excellent recoatability allows very short work times. "EXCLUSIVE USE IN INDUSTRIAL FACILITIES"
Spray enamel developed for the painting of automobile tires, as well as for industrial use as a metallic enamel in a single layer. It stands out for its simple application, quick drying, hiding power, resistance to friction and to the car wash. The VOC content is 746 g / l (2004/42 / CE) IIB (E) (840).
Spray paint specially formulated for the touch-up of vehicle bumpers. Presents a finish that resembles those of origin. Its use as an anchor primer for plastics with excellent adhesion is feasible. To achieve different textures, the nozzles can be exchanged, as well as to distance the paint distance more or less. The VOC content is 840 g / l (2004/42 / CE) IIB (E) (840)
Polyester Putty intended for the filling of dents and other body irregularities. It stands out for its adhesion, filling power and flexibility. Usable in the painting of the automobile and industrial vehicle. Adhesion on galvanized steel and electrozinc.