Professional Rainbow Waterproofing Antigoteras 15 L

Description

Plastic coating copolymer based elastic for waterproofing acrylics, offering high water resistance, elasticity and yield.

Recommended uses

For waterproofing roofs and exterior walls.

Technical characteristics

-Performance: About 2.5 m² / L for dry film 300 microns (approximate and as support).

-Useful Of application: Brush / roller / gun.

-Dilución: Apply a first coat diluted 15-20% with water. Ending other hand undiluted.

Surface treatment

New surfaces.On surfaces in good condition, apply a first coat diluted with 10-15% water, apply a second undiluted. On surfaces in poor condition, clean up all affected areas, removing all the material is not well bonded and consistent, cleaned all the dirt and dust that may have. To consolidate and standardize porous substrate is advisable to apply a first layer Fixer Wateror Sealingra water.

Old surfaces in poor condition.Completely remove the old paint and proceed as in new areas. In tempera paintings, to the tail, lime or where those surfaces are removed, previously applied Fixer WaterSealing or water. The same approach is used for very absorbent surfaces or with little consistency.

Painted surfaces in good conditionDirectly apply the paint before brushing or washing, diluting the first coat with 10 to 15% water, then apply the second layer as it is.