Polyester putty two components, with excellent adhesion to plastic bumpers or other plastic parts, except for polyethylene. Before application, just degrease the surface and rub with a cloth that does not shed fibers. It is extremely easy to sand with a grain of paper P120-240 and a perfect finish without pores is obtained. Does not clog sandpaper. Excellent mechanical strength due to its high elasticity.
ign: justify; ">
Product intended for repairs of plastic body parts for cars and industrial and professional use.
Mixing ratio by weight:
- Putty: 100
- Hardener: 2-3
Mix well until dough is uniform in color. Remove carefully to not incorporate air.
Layer thickness:The mastic can be applied in several thin layers. Before applying the next layer, the previous must be hardened. Sanding before putting the next layer.
Working time of mix: 45 minutes.
Drying time:35-45 minutes at 23 ° C. 5-8 minutes with an infrared lamp at less than 70 cm.
Sanding:Sanding recess (dry): P80-P120. Finish sanding (dry): P120-P240