Stripper of Lasures Prepdeck Owatrol 1 L

Description h3>

PREPDECK® paint stripper / cleaner is a professional product of superior quality specially designed to remove old solid and semi-transparent stains, classification marks and other wood finishes. Diluted becomes a powerful cleaner that removes dirt and other contaminants from the surface, it is also an easy and quick means of removing glaze from new wood.

• Viscosity: liquid fluid. li>
• Specific gravity (at 20ºC): 1.05 ± 0.05.
• Physical state: liquid.
• Flammability: N / A.
• Flash point: N / A. li>
• Storage: 2 years in the original packaging unopened. li>
• Appearance: yellowish white or amber li>
• VOC: N / A.

performance

• Undiluted: 3-4 m2 per liter.
• Diluted 1: 1: up to 8 m2 per liter.
• Diluted 1: 4: up to 16 m2 per liter.
• Diluted 1:10: up to 40 m2 per liter.

The current yield would vary depending on the method of application, type, texture, age and porosity of the wood and the conditions of the pickling coating.

Properties

• Removes old finishes from exterior wood including 100% acrylics.

• Reduce the glaze of new wood, so that it can penetrate a saturating finish.

• Cleans aged wood.

• Eliminates classification marksication. p>

• Use alone or diluted.

• Three products in one.

Indications

• Only for exteriors.

• All types of exterior wood - pressure treated woods, hard woods, heat treated ...

• Exterior wood surfaces - garden furniture, platforms, coverings ...

• Horizontal and vertical surfaces.

Preparation of the surface h3>

Remove any remaining and flakes from the finish. Remove any contaminants from the surface such as moss, general dirt, etc.

Application h3>

Shake or stir the product well before use and during its use, including diluted solutions. Use PREPDECK® as is or diluted according to the indications in the "Dilution" section. Keep the surface wet while using PREPDECK®. After rinsing, always neutralize the surface with NET-TROL® * except where TROPITECH® ALL IN ONE * has been chosen as finished (see "After stripping / cleaning"). Do not use a metal brush to clean the surface. Work large areas in parts. Allow the wood to dry completely, 2-3 days before applying the finish.

DECAPAR YLIMPIAR

Work in areas that can be completed in 15-30 minutes. Apply PREPDECK® in the area that has to be stripped or cleaned and leave to act. After an appropriate time, test in a small area with a nylon scrubbing brush to see if dirt rises orfinished If he gets up; scrub the area with a hard nylon brush or a pressure washing machine of 1000-1500 psi (70-103 bar) depending on the type of wood. Always work following the direction of the grain. Wash with a generous amount of fresh water, using the highest pressure available from the water source or use a 500-1000 psi (35-70 bar) pressure washing machine working in the grain direction. NOTE: the use of hot water facilitates the work.

REDUCATE GLASSING

Apply PREPDECK® diluted in the area to be treated. Leave on for 20 minutes. Scrub the area with a hard nylon brush or a pressure washing machine of 1000-1500 psi (70-103 bar) depending on the type of wood. Always work following the direction of the grain. Wash with a generous amount of fresh water, using the highest pressure available from the water source or use a 500-1000 psi (35-70 bar) pressure washing machine working in the direction of the grain (wash the areas adjoining the Same time).

HEIMINATE CLASSIFICATION BRANDS

Apply PREPDECK® without diluting and rub until the mark disappears. Wash thoroughly. p>

* If you want more information about this product, you can download its technical sheet in the tab "ATTACHMENTS".