List of products by brand Besa

€35.90
VAT included
Last items in stock

UHS express surfacer that has been formulated with totally innovative resins and indicated in partial quick repairs. It stands out for its covering and excellent sanding thanks to its hardening speed, and the vehicle can be sanded at 20-25 min. From the application without the need for energy expenditure of heat in the cabin or IR systems, which can generate significant savings in the painting cycle, as well as an increase in productivity.

€30.10
VAT included
Last items in stock

The URKI-FIB Putty, based on Fiberglass, is intended for the filling of dents, cracks, perforations or splinters in steel, cast iron or laminated Polyester-Fiberglass (GRP). Usable in the repair of car bodies and industrial vehicles, railway equipment, machinery, boats, etc. Also in the construction of models and prototypes where an easily moldable material with easy sanding is required. It stands out for its resistance, filling power, ease of application and sanding.

€22.10
VAT included
Last items in stock

Acrylic equipment used in repair processes for Industrial Vehicles, equipment and machinery in general. Applicable on primers, polyester putties or directly on sanded sheet. It presents great power of filling, equalization and speed of drying; easy to sand, which added to its excellent recoatability allows very short work times. "EXCLUSIVE USE IN INDUSTRIAL FACILITIES"

€182.15
VAT included
Last items in stock

BESA-GLASS UHS Ultra High-Solids Varnish, for Bi-Coat Systems; It stands out for its very high non-volatile content at application viscosity, achieving more body, shine and enhanced metallic effect than with conventional products, complying with environmental legislation. Very good UV resistance. It is aimed at repainting the car in Bi-Layer Systems.

€22.40
VAT included
Last items in stock

Adhesion promoter for a wide variety of plastic parts in the automotive sector. garden furniture or other hard plastic objects. Applicable on the following types: PP, PUR, PS, PA, PP-EPDM, ABS, PVC, GRP, PC It is suitable for the application of patches and / or small surfaces. It is very easy to apply and allows high adhesion power on the indicated substrates.

€8.63
€10.15 -15%
VAT included
Last items in stock

Spray paint specially formulated for the touch-up of vehicle bumpers. Presents a finish that resembles those of origin. Its use as an anchor primer for plastics with excellent adhesion is feasible. To achieve different textures, the nozzles can be exchanged, as well as to distance the paint distance more or less. The VOC content is <840 g / l (2004/42 / CE) IIB (E) (840)

€8.60
VAT included
Last items in stock

Adhesion promoter for a wide variety of plastic parts in the automotive sector. garden furniture or other hard plastic objects. Applicable on the following types: PP, PUR, PS, PA, PP-EPDM, ABS, PVC, GRP, PC. It is suitable in the application of patches and / or small surfaces. It is very easy to apply and allows high adhesion power on the indicated substrates. The VOC content is 754 g / l (2004/42 / CE) IIB (E) (840).

€19.80
VAT included
Last items in stock

Acrylic varnish of 2 components to perform partial repairs with Bi-layer Systems. It stands out for its resistance to scratching, gasoline and good behavior to the exterior, as well as for its speed of drying and leveling. The finish that is achieved is the same as with conventional 2 c varnishes. of use with a gun. It has a deposit in the lower part that when activated mixes the two components to apply the varnish.

€15.70
VAT included
Last items in stock

Phosphochromative primer of 1 c. of excellent adhesion on Steel. On Aluminum or Zinc plated we recommend previous proof. Its fast drying, its recointability with all kinds of finishes in wet-on-wet processes orients this product to those markets that require speed in the process. Suitable for Machine Tool, Industrial Bodywork, usable as a shop primer for its resistance to oxidation. Resistance is obtained in Salt fog of up to 300 hours when it is coated with PUR finishes. It can be dried at temperatures of 160ºC. It is weldable and does not give off toxic fumes.