Menu
-
CAR PAINTINGS
-
PAINT AT HOME
- Varnishes for interior wood
- Exterior and marine varnishes for wood
- Exterior wood and deck stains and teak oils
- Enamels for Wood
- Furniture, kitchen cupboards and doors painting
- Chalk colour paint and chalk spray paint
- Anti termites treatments and woodworms protection
- Primers for Wood
- Wood putties
- Clean and Renovate Wood
- Furniture repair
-
PROFESSIONAL PAINT
-
BOAT PAINTING
-
CRAFTS
-
GARDEN
- COLD AND HEAT
-
HARDWARE
-
TOOLS
-
ELECTRICITY
-
PLUMBING AND GAS
- DECORATION
- ORDINATION
-
BATHROOM
- HOME
Search
Rust-Oleum Neon Spray 400mL
quality acrylic paint light effect for use on most interior surfaces. It noted for its fast drying, high adhesion and covering abrasion resistance and scratch. The spray cap indicates the color and paint finish.
You might also like
Related Products ( 16 other products in the same category )
Water-based Titanlux Eco-Friendly Enamel
Lacquer wood effect Titanlak
Titanlux Eco-friendly Satin Water Polish
Ecological Shiny Enamel Water Based Titanlux
Glossy Universal Spray Rust-Oleum 400ml
Deco Lasur Xylazel Color
Description
quality acrylic paint light effect for use on most interior surfaces. It noted for its fast drying, high adhesion and covering abrasion resistance and scratch. The spray cap indicates the color and paint finish.
How to use
On non-pre-treated surfaces must first be primed with a primer Universal
1. previously and spray Shake vigorously for 1 minute minimum since the movement of the ball inside note. Also stir occasionally during application of the paint.
2. Apply at room temperature between 10 and 32 ° C and below 85% relative humidity.
3. Spray uniformly in parallel and the same distance of the part or support (30 cm. Approx.) To be decorated.
4. Clean wet paint spray nozzle after the container upside down for several seconds.
5. On surfaces exposed to strong sunlight for long periods of time, the color intensity can be lowered.
Surface Preparation
Surfaces should be consistent, dry and free from POLVor, grease, oils, waxes and any dirt.
If applied on paints, enamels or old varnishes, ensure proper adhesion by pre-sanding.
Cover surrounding areas to protect them from spray and mist spray.
Technical data
- Yield: 2.5 m2 approx. in total and with a proper cover (2-3 layers). This performance may vary depending on the porosity and texture of the support to decorate.
- Application: Interior
- Drying: 15 minutes to touch. 20 minutes between layers.
- Packaging: 400 ml
Data sheet
- Degree of Brightness
- Brightness
- Theoretical yield per hand (m2 / Spray):
- 2.5
- Number of recommended hands:
- 3
- Dry to Touch at 23ºC and 60% RH
- 15 minutes
- Time for repainting at 23ºC and 60% RH
- 20 minutes
- Type Application:
- Spray
- Place of application
- Interior Only
- Paint Iron or Steel
- Synthetic, Antioxidant or Multipurpose Primer
- Paint Aluminum, Brass or Copper
- Multipurpose Primer
- Paint Galvanized Steel
- Galvanized or Multipurpose Primer
- Paint Already Painted Surfaces
- A smooth sanding and painting directly
- Danger for transport:
- Prohibited Air Transportation
Specific References
- ean13
- 5013296955850
No customer questions for the moment.