Chalk Paint Rust-Oleum Xylazel
Price
€8.35
anticorrosive fast drying water for all types of surfaces preparation. Extraordinary bridge or unpainted adherence on many previously painted substrates. total guarantee against corrosion (according to DIN EN ISO 9227).
anticorrosive fast drying water for all types of surfaces preparation. Extraordinary bridge or unpainted adherence on many previously painted substrates.
total guarantee against corrosion (according to DIN EN ISO 9227).
Protection against rust on steel surfaces.
adherent primer: Galvanised, aluminum, steel, brass, copper, rigid PVC, acrylic, polyurethane, melamine and tile.
Excellent sealer for wood and MDF, produces lacquer finishes type.
Good sealant localized stains on walls and ceilings indoors. Fixed prevents stains and migrate to the topcoat. effective treatment for spots rotuladors, pencils, coffee, grease and nicotine.
- Finish: Matte
- Colors: White
- Yield: 8 to 12 m² / Lt (depending on the material where applicable)
- Drying at 23 ° C and 60% RH: 30-60 minutes
- Repainting at 23 ° C and 60% RH: 6-8 hours or24 hours to recoat with 2-component products.
- Recommended thickness: non-ferrous metals: 30 - 35 μ (1 Hand) / Ferrous Metals: 70 - 80 μ (2 coats)
- Tools: brush, roller or spray.
- Cleaning utensils: water.
Salt spray chamber according to DIN EN ISO 9227: Excellent behavior against corrosion on steel (80 μ dry) after 250 hours of testing.
General recommendations:Stir in the package. Primed surfaces should be clean, dry, degreased and deoxidized.
Surfaces not prepared:
-Steel:deoxidation using wire brush or sandpaper. Degrease and remove dust and debris oxide.
-Galvanized, PVC, zinc, brass, aluminum and copper clean with water and ammonia detergent. Gently sanding adhesion is improved. Apply one coat. In wet and outdoor areas, apply 2 coats of preparation.
-Wood:wood sanding direction of the grain, clean thoroughly, remove resins or resin secretions and kill sharp edges. Apply 1 or 2 coats as absorption or outdoors, sanding between coats if a fine finish is desired. In woods outdoors, first apply Titanxyl Lasur Water Fund.
-MDF:apply 2 coats, sanding between coats. Eliminating any enamel TITAN range, produces finished type "lacquer" no appearance of fibers.
-Old painted surfaces:if they are well attached, degrease and apply Multipurpose Water Preparation TITAN. Gently sanding, adhesion is improved.
-As sealant stains:applying a first layer to the affected area to set the stain surfaces, apply a second apa for more stubborn stains (these layers set the stain, but not the cover). The cover of the stain is achieved with paint finish. If the stained area is very large it is preferable to use our Water Aislasol A17.
In all cases, the Multipurpose Preparation Water TITAN if not coated after 7 days before, it is recommended to lightly sanded to favor the anchorage of the finish.
Maintenance painted surfaces in poor condition:Remove completely and proceed as in unprepared surfaces.
Data sheet
Specific References
No customer questions for the moment.