Oxiron Smooth Satin Effect Forge
antioxidant quick-drying enamel direct application on steel, without prior primer. It provides excellent weather resistance up to 10 years and a highly decorative satin finish forging effect smooth, high adhesion, hardness and resistance to scratches and bumps and washability unlike a normal forging finish.
You might also like
Related Products ( 16 other products in the same category )
Description
antioxidant quick-drying enamel direct application on steel, without prior primer. It provides excellent weather resistance up to 10 years and a highly decorative satin finish forging effect smooth, high adhesion, hardness and resistance to shock and scratches.
Forging effect smooth finish provides outstanding cleaning unlike forging or normal blued finish.
Fields of application
Ideal for fences, benches, appliances, doors.
Technical characteristics
- Finish: Satin
- Colours: Grey Steel, Black and Brown
- Yield: 12 - 14 m2 / l (30 - 35μ)
- Drying at 23 ° C and 60% RH: 3-4 hours
- Repainting at 23 ° C and 60% RH: From 18 hours.
- Recommended thickness: 60 - 100 μ (2-3 coats)
- Tools: Roller or spray gun.
- Cleaning of tools: universal solvent.
Certifications
Complies with standard UNE 48316: 2014. Paints and varnishes. Enamels anticorrosive decorative high performance solvent base.
Surface treatment
General recommendations:Stir in the package. The surfaces should be degreased, dry and free of dirt loose rust, and colamine. By the characteristics of the product (metal particle) the application roller or spray is recommended. In application roller comb always in the same direction to avoid metallic marks.
Surfaces not prepared:
-Steel:It can be applied directly without primer. If the surface is rust, sand lightly to roughen the substrate, eliminating the friable oxide. Medium corrosion environments should be sanded steel to grade ST 3 of the UNE EN ISO 8501-1. Under these conditions a minimum thickness of 120 microns is required. Preferably, in these environments, previously applied or Minium Multipurpose Synthetic Preparation Titanlux.
-Galvanizing, zinc, brassLijar to refine and apply Multipurpose Preparation.
-Wood:TITAN sealing or PREPARATIONSn Multi.
-Other Media:consult.
Maintenance painted surfaces in poor condition:Remove with emery cloth or wire brush rust and poorly adhering paint coatings. To finish application, proceed as unprepared surfaces.
Data sheet
- Kind of product:
- Antioxidant finish without primer
- Degree of Brightness
- Satin
- Theoretical yield per hand (m2 / L):
- 12
- Number of recommended hands:
- two
- Sanding between layers
- It is not necessary
- Dry to Touch at 23ºC and 60% RH
- 3 hours
- Time for repainting at 23ºC and 60% RH
- 6 pm
- Diluent / Cleaning:
- Universal Solvent
- Number of Components
- 1 component
- Type Application:
- Roller or gun
- Place of application
- Interior and Exterior
- Paint Iron or Steel
- Directly
- Paint Aluminum, Brass or Copper
- Multipurpose Primer
- Paint Galvanized Steel
- Galvanized or Multipurpose Primer
- Paint Already Painted Surfaces
- A smooth sanding and painting directly
- Danger for transport:
- Prohibited Air Transportation
- advice
- The forging effect finish provides an extraordinary cleanliness unlike the normal forging finish
Specific References
- ean13
- 8414800370911
Hi Can the forged affect be applied directly to a galvanised surface......
Thx
Hello Wayne. Not this one, but the same product in water-base can be applied perfectly onto galvanized surface. Here is the link https://pinturas-dami.com/gb/1434-antioxidant-enamel-titan-oxiron-water-based-smooth-forging-effect.html