Quality Oxirite Monocapa 12 years
Quality is an antioxidant Oxirite enamel applied directly to the surfaces of iron or steel to a single hand, either new or oxidized, without using any previous priming. It provides excellent corrosion protection and an attractive smooth high-gloss finish. Indoor or outdoor. It provides protection of 12 years in good condition.
You might also like
Related Products ( 16 other products in the same category )
Product description
Quality is an antioxidant Oxirite enamel applied directly to the surfaces of iron or steel to a single hand, either new or oxidized, without using any previous priming. It provides excellent corrosion protection and an attractive smooth high-gloss finish. Indoor or outdoor. It provides protection of 12 years in good condition.
Features antirust paint Oxirite
- Direct application on metal, unprimed.
- It can be applied on rusty surfaces, previously removing loose particles.
- Monocapa. In most cases a single hand with the covering needed is obtained.
- For its thixotropic aspect (cream, gel type) can leave a thick layer without sagging.
- Fast drying, from 1 hour.
- Easy to apply. No leaks.
- excellent leveling.
- High gloss (> 94 to 200 μ wet, 24 h dry, 60th).
- Base solvent
align: justify "> Performance
In urban and industrial atmospheres, moderate sulfur dioxide pollution and coastal areas with low salinity with 80 dry microns will be sufficient (about 6 m² per liter). According to tests performed in the Laboratory of Tecnalia according to ISO 12944, with 80 dry microns Oxirite Quality meets the criteria for high C3 / C4 medium atmospheric environments.
Preparation of surfaces
New surfaces:Clean and degrease to remove traces of oil and dirt on the surface.
Painted surfaces:Apply on clean and dry surfaces. Remove non-adhering coatings, pickling, scraping or sanding and loose rust particles. If the surface is corroded areas, it should scratch it with a wire brush or abrasive emery to remove all loose rust and scale. St-2 level (UNE-EN-ISO 12944- 4). Stir before using, do not shake vigorously, as the product loses thixotropy. It is not necessary to apply an anticorrosive primer. On surfaces of non-ferrous metals such as aluminum, galvanized iron or copper it is necessary to apply an adhesive primer such as primer Xylazel Multiadherente Antioxidant.
Drying
Surface drying normally from 1 hour. If you want to apply a second coat, recoating can be done from 1 hour. With cold temperatures drying may be delayed somewhat.
application
Apply the product undiluted. For good antioxidant protection, two coats, although in most cases a single hand with the covering needed is obtained. The product can be applied by brush, brush, roller gun and short hair.
Notice
The colors are approximate and may vary depending on the computer screen you are using.
Data sheet
- Kind of product:
- Antioxidant finish without primer
- Degree of Brightness
- High brightness
- Theoretical yield per hand (m2 / L):
- 10
- Number of recommended hands:
- one
- Sanding between layers
- It is not necessary
- Dry to Touch at 23ºC and 60% RH
- 1 hour
- Time for repainting at 23ºC and 60% RH
- 1 hour
- Time for maximum hardness
- 7 days
- Diluent / Cleaning:
- Specific Solvent
- Number of Components
- 1 component
- Type Application:
- By brush, roller or gun
- Place of application
- Interior and Exterior
- Paint Iron or Steel
- Directly
- Paint Aluminum, Brass or Copper
- Multipurpose Primer
- Paint Galvanized Steel
- Galvanized or Multipurpose Primer
- Paint Already Painted Surfaces
- A smooth sanding and painting directly
- Danger for transport:
- Prohibited Air Transportation
- advice
- In very saline environments apply more hands
Specific References
- ean13
- 8414956717462
No customer questions for the moment.