• Reduced price
Alp Paintings Painting Chlorinated rubber pools 15 L

Chlororubber Paint for Pools

Chlorinated rubber paint, specially formulated to allow free diffusion of water vapor contained in the perimeter walls and tiled pools, into it, thereby avoiding the possibility of blistering and peeling paint.

€118.30 €169.00 -30%
VAT included
Last items in stock

Description

Chlorinated rubber paint, specially formulated to allow free diffusion of water vapor contained in the perimeter walls and tiled pools, into it, thereby avoiding the possibility of blistering and peeling paint.

Key Properties

Excellent quality / price ratio.

-Ease Application.

Resistant to dilute acids and alkalis.

-Repintable On solvent based acrylic paints.

Recommended uses

Application on walls and pavement POOLS cement or concrete.

Technical characteristics

-Performance: 12-14 m² / Lt per coat (Approximate)

-layers: Two layers.

-Useful: Brush / roller.

Surface treatment

New Surfaces:The new media should not be painted before 28 days, in order that the concrete is completely set. Then do an acid washsurface with hydrochloric acid (Salfuman) diluted 10% with water. Then rinse with abundantwater to remove carbonates and aggregates loosely adhered to the dough, and allowed to dry thoroughly for a minimum of 48 hours. The first coat should be applied diluted to 10% with our thinner quick-drying, so that penetrate deep into the bracket. After 24 hours, apply a second coat as presented in the package.

Old surfaces:Must clean and degrease the surface. In pools already painted, they should be removed defective areas of painting and sand the parts which cling, trying not to place undue layer thereon. Recoatable with itself and solvent based acrylic paints. About we recommend acrylic water, carry out a test of adherence.

20602
13 Items
8410549961489
Data sheet
Kind of product:
Finishing paint or final coat
Degree of Brightness
Semi-Mate
Theoretical yield per hand (m2 / L):
12
Number of recommended hands:
two
Sanding between layers
It is not necessary
Dry to Touch at 23ºC and 60% RH
10 minutes
Time for repainting at 23ºC and 60% RH
24 h
Time for maximum hardness
7 days
Diluent / Cleaning:
Clorocaucho solvent
Number of Components
1 component
Type Application:
With brush or roller
Paint Fiber Polyester
Prohibited
Paint Concrete or Cement
Directly
Paint Already Painted Surfaces
A smooth sanding and painting directly
Danger for transport:
Dangerous terrestrial / maritime, airborne
advice
Forbidden to repaint over water pools
Your Question has been successfully sent our team. Thanks for question!
Do not leave with doubt! Its time to ask!
hide form
Captcha

You might also like

Customers who bought this product also bought: