Menu
-
CAR PAINTINGS
-
PAINT AT HOME
- Varnishes for interior wood
- Exterior and marine varnishes for wood
- Exterior wood and deck stains and teak oils
- Enamels for Wood
- Furniture, kitchen cupboards and doors painting
- Chalk colour paint and chalk spray paint
- Anti termites treatments and woodworms protection
- Primers for Wood
- Wood putties
- Clean and Renovate Wood
- Furniture repair
-
PROFESSIONAL PAINT
-
BOAT PAINTING
-
CRAFTS
-
GARDEN
- COLD AND HEAT
-
HARDWARE
-
TOOLS
-
ELECTRICITY
-
PLUMBING AND GAS
- DECORATION
- ORDINATION
-
BATHROOM
- HOME
Search
White Plastic Painting Titanlux Full Coverage
Washable paint matt white in interior / exterior that covers with a single layer on surfaces already painted. Decorate walls and ceilings with a quality finish and very resistant. Without smell. It does not drip or splash. With anti-mildew preservative. Environmentally friendly. Reaction to fire B-s1, d0 on calcium silicate.
You might also like
Related Products ( 16 other products in the same category )
Water-based Titanlux Eco-Friendly Enamel
Titanlux Eco-friendly Satin Water Polish
Ecological Shiny Enamel Water Based Titanlux
Biosustainable Fixing Primer S90N 15L Titan Pro
Full Coverage Plastic Paint Colors 15L Titanlux
White acrylic coating Biosustainable R90N 15L Titan Pro
Bio-sustainable paint bucket 4L Titanlux
White acrylic paint Biosustainable P80N 15L Titan Pro
Purifying acrylic paint P90 Matt White 15L Titan Pro
Bucket painting full coverage 4L Titan
Description h3>
Washable paint matt white in interior / exterior that covers with a single layer on surfaces already painted. Decorate walls and ceilings with a quality finish and very resistant. Without smell. It does not drip or splash. With anti-mildew preservative. Environmentally friendly. Reaction to fire B-s1, d0 on calcium silicate.
Certifications
- Reaction to Fire UNE EN 13501-1: 2007 + A1: 2009: B-s1, d0 on calcium silicate.
- Wet rub resistance UNE EN ISO 11998: CLASS 2 li>
- Determination of the covering power UNE EN ISO 6504/3: 8.7m2 / l (98% Covering power) li>
- Resistance against fungi UNE EN 15457: Growth 0
How to use
General recommendations:Stir well in the container. The surfaces to be painted must be clean, dry and consistent. p>
Unprepared surfaces:On surfaces in good condition: apply a first layer diluted with 10 - 15% of water, applying a second layer undiluted. On surfaces in poor condition: clean all affected areas, removing all material that is not well adhered and 2 consistent, cleaning all dirt and dust they may have. For withSolve substrate and homogenize porosity or on tempera paints, glue, lime or on surfaces where they have been removed: it is advisable to apply a first coat of TITAN Fixer or Sealer.
Maintenance of painted surfaces in good condition:Directly apply the previously washed or brushed paint, diluting the first layer with 10-15% water, then apply the second layer as is.
Maintenance of painted surfaces in poor condition:Completely remove the old paints and proceed as on unprepared surfaces.
Data sheet
- Kind of product:
- Finishing paint or final coat
- Degree of Brightness
- Mate
- Theoretical yield per hand (m2 / L):
- 10
- Number of recommended hands:
- 2
- First layer application
- Dilute between 10-15% so that it penetrates well into the support
- Diluent / Cleaning:
- Water
- Type Application:
- By brush, roller or gun
- Place of application
- Interior and Exterior
- Paint Wood
- Primer Sealer or Multipurpose
- Paint Pladur
- Directly
- Paint Plaster or Putty
- Directly
- Paint Concrete or Cement
- Directly
- Paint Already Painted Surfaces
- Directly without sanding
- Danger for transport:
- Innocuous, without restrictions
Specific References
- ean13
- 8414800390964
Download
No customer questions for the moment.