Lacquer wood effect Titanlak
Lacquer that produces a special effect by mimicking the natural wood grain but a smooth, hard, strong and silky finish. Titanlak lacquer wood effect can be applied to any non-porous surface or glazed doors, frames, cabinets, appliances, wainscoting, windows, etc. Their colors can be mixed to form other colors.
You might also like
Related Products ( 16 other products in the same category )
Description
Titanlak wooden lacquer effect is a special effect varnish, polyurethane based, high solids technology. Easy to apply. Hiding. Smooth finish, tough, durable and silky. Colour, grain and natural wood look. Washable. The lacquer colors wood effect Titanlak are intermixable and weatherproof.
Recommended uses lacquer wood effect Titanlak
It is used both indoors and outdoors. It is special to imitate wood with a single layer. It can be applied to any non-porous surface or glazed doors, frames, cabinets, appliances, wainscoting, windows, etc.
Technical characteristics
-Performance: 10-12 m² / Lt per coat (Approximate)
-layers:
*interior:1 layer is in most cases sufficient
*Outside:for enhanced weather resistance, apply 2 coats.
-Useful Application: Paletina (width 7-8 cm).
Surface treatment
applicationunprepared surfaces:
-Wood:Sand the wood in the direction of the grain, clean thoroughly, remove resins or resin secretions and kill sharp edges. Apply primer sealer or Multiadherente as needed.
-Iron:Electrolytic Minium previously applied. Working outdoors two coats of primer selected you will be required. Indoors, one layer is sufficient.
-Melamine laminates:degrease and sand to qualify.
Application on painted surfaces in good condition: Span>washing, sand lightly and apply directly Titanlak wood effect.
Application on painted surfaces in poor condition: Span>completely remove and proceed as in new areas.
Notice
The colors are approximate and may vary depending on the computer screen you are using.
Data sheet
- Kind of product:
- Finishing paint or final coat
- Degree of Brightness
- Satin
- Theoretical yield per hand (m2 / L):
- 10
- Number of recommended hands:
- two
- Sanding between layers
- It is not necessary
- Dry to Touch at 23ºC and 60% RH
- 6 - 8 a.m.
- Time for repainting at 23ºC and 60% RH
- 24 hours
- Diluent / Cleaning:
- Universal Solvent
- Number of Components
- 1 component
- Type Application:
- Plate width 7 - 8 cm
- Place of application
- Interior and Exterior
- Paint Iron or Steel
- Synthetic, Antioxidant or Multipurpose Primer
- Paint Aluminum, Brass or Copper
- Multipurpose Primer
- Paint Wood
- Primer Sealer or Multipurpose
- Paint Galvanized Steel
- Galvanized or Multipurpose Primer
- Paint Already Painted Surfaces
- A smooth sanding and painting directly
- Danger for transport:
- Prohibited Air Transportation
- advice
- In the second layer let the product dry about 7 min to be able to comb. You can make spikes to the blade with scissors to create a better effect.
Specific References
- ean13
- 8414800028768
Me llamo David vivo en miami USA y quiero saber cuanto me cuesta
el galon de 2802 Roble-Oka. Enviarmelo a miami.
Saludo David
Espero espero su respuesta.
Hola David, lamentamos decirte que no servimos en Estados Unidos. Un saludo.