Titanlak wooden lacquer effect is a special effect varnish, polyurethane based, high solids technology. Easy to apply. Hiding. Smooth finish, tough, durable and silky. Colour, grain and natural wood look. Washable. The lacquer colors wood effect Titanlak are intermixable and weatherproof.
Recommended uses lacquer wood effect Titanlak
It is used both indoors and outdoors. It is special to imitate wood with a single layer. It can be applied to any non-porous surface or glazed doors, frames, cabinets, appliances, wainscoting, windows, etc.
-Performance: 10-12 m² / Lt per coat (Approximate)
*interior:1 layer is in most cases sufficient
*Outside:for enhanced weather resistance, apply 2 coats.
-Useful Application: Paletina (width 7-8 cm).
-Wood:Sand the wood in the direction of the grain, clean thoroughly, remove resins or resin secretions and kill sharp edges. Apply primer sealer or Multiadherente as needed.
-Iron:Electrolytic Minium previously applied. Working outdoors two coats of primer selected you will be required. Indoors, one layer is sufficient.
-Melamine laminates:degrease and sand to qualify.
Application on painted surfaces in good condition: Span>washing, sand lightly and apply directly Titanlak wood effect.
Application on painted surfaces in poor condition: Span>completely remove and proceed as in new areas.
The colors are approximate and may vary depending on the computer screen you are using.