Bodyfiller 260 HBBody 1L polyester putty
You might also like
Related Products ( 4 other products in the same category )
Two-component polyester putty for spray application. It is applied with a spray gun nozzle of 2.50 - 3.00 mm. Due to its high thixotropic consistency, the hardener must be thoroughly removed. It is easy to sand (dry) to obtain a uniform finish without pores. It dries in 2-3 h at 23 ° C (73 ° F).
Proportion of the mixture according to weight:
- Putty: 100
- Hardener: 5
Mix well until the paste has a uniform color. Carefully remove so as not to incorporate air.
Useful mixing time: 45 minutes.
Drying time:2-3 h at 23 ° C. 30 min in oven at 60ºC and 6-10 min with infrared lamp less than 70 cm.
Sanding:Finishing sanding (dry): P120-P240.
- Kind of product:
- Dry to Touch at 23ºC and 60% RH
- 20 min
- Number of Components
- 2 components
- Mix ratio
- 5 g of catalyst per 100 g of putty
- Life of the mixture at 23ºC and 60% RH
- 4 min
- Type Application:
- By gun
- Danger for transport:
- Prohibited Air Transportation