Bucket painting full coverage 4L Titan
Washable interior / exterior paint that covers with a single layer. Decorate walls and ceilings with a quality finish and very resistant. Without smell. It does not drip or splash. With anti-mildew preservative. Environmentally friendly.
(*) Colors not suitable for outdoor: 1014 Yellow Honey / 1016 Lime Green / 1017 Apple Green
You might also like
Related Products ( 16 other products in the same category )
Description
Washable interior / exterior paint that covers with a single layer. Decorate walls and ceilings with a quality finish and very resistant. Without smell. It does not drip or splash. With anti-mildew preservative. Environmentally friendly.
(*) Colors not suitable for outdoor: 1014 Yellow Honey / 1016 Lime Green / 1017 Apple Green
Certifications
Reaction to Fire UNE EN 13501-1: 2007 + A1: 2009:B-s1, d0 on calcium silicate.
Wet rub resistance UNE EN ISO 11998: CLASS 2
Determination of the covering power UNE EN ISO 6504/3: 8.7m2 / l (98% Coverage)
Resistance to fungi UNE EN 15457:Growth 0
Technical characteristics
- Nature: Acrylic styrene
- Finish: Semi-matt
- Color (UNE EN ISO 11664-4): White
- Density (UNE EN ISO 2811-1): 1.36 - 1.40kg / l
- Performance (UNE 48282): 0.6 - 0.7 m2 / l (approximately 1.5 l / m2) per layer
- Drying at 23ºC 60% RH (UNE 48301): 6 - 8 hours
- Repaint at 23ºC 60% RH (UNE 48283): 18 - 24 hours. Stable: 2 - 3 days
- Application Methods: Brush and Roller
- Thinner: Water
- Recommended thickness (UNE EN ISO 2808): 1.0 - 1.2 mm dry film
- Solid Volume (UNE EN ISO 3233-3): 41.5 - 42%
- VOC (UNE EN ISO 11890-2): 2.004 / 42IIA (c) (75/40) Max. VOCs 5 g / l.
* Variations of temperature, humidity, thickness or type of support, etc., can cause changes in drying, performance, etc.
How to use
GENERAL RECOMMENDATIONS:
Stir well in the container. The surfaces to be painted must be clean, dry and consistent.
SURFACES NOT PREPARED: On surfaces in good condition: apply a first coat diluted with 10 - 15% of water, applying a second layer undiluted. On surfaces in poor condition: clean all affected areas, removing all material that is not well adhered and consistent, cleaning all dirt and dust they may have p>
To consolidate substrate and homogenize porosity or on tempera paints, glue, lime or surfaces where they have been removed: it is advisable to apply a first layer of TITAN Fixer or Sealer.
MAINTENANCE OF PREVIOUSLY PAINTED SURFACES IN GOOD CONDITION: Directly apply the previously washed or brushed paint, diluting the first layer with 10-15% of water, then apply the second layer as is p>
MAINTENANCENTO SURFACES ALREADY PAINTED IN BAD CONDITION: Completely remove old paints and proceed as on unprepared surfaces.
* If you want more information about this product, you can download its technical sheet in the tab "ATTACHMENTS"
Data sheet
- Kind of product:
- Finishing paint or final coat
- Degree of Brightness
- Semi-matt
- Theoretical yield per hand (m2 / L):
- 9
- Sanding between layers
- It is not necessary
- Dry to Touch at 23ºC and 60% RH
- 20-40 min
- Time for repainting at 23ºC and 60% RH
- 6-8 h
- Diluent / Cleaning:
- Water
- Type Application:
- With brush or roller
- Place of application
- Interior and Exterior
- Paint Pladur
- Primer Sealer or Fixer
- Paint Plaster or Putty
- Primer Sealer or Fixer
- Paint Concrete or Cement
- Fixing Primer
- Paint Already Painted Surfaces
- Directly without sanding
- Danger for transport:
- Innocuous, without restrictions
Specific References
- ean13
- 8414800390988
No customer questions for the moment.