Menu
-
CAR PAINTINGS
-
PAINT AT HOME
- Varnishes for interior wood
- Exterior and marine varnishes for wood
- Exterior wood and deck stains and teak oils
- Enamels for Wood
- Furniture, kitchen cupboards and doors painting
- Chalk colour paint and chalk spray paint
- Anti termites treatments and woodworms protection
- Primers for Wood
- Wood putties
- Clean and Renovate Wood
- Furniture repair
-
PROFESSIONAL PAINT
-
BOAT PAINTING
-
CRAFTS
-
GARDEN
- COLD AND HEAT
-
HARDWARE
-
TOOLS
-
ELECTRICITY
-
PLUMBING AND GAS
- DECORATION
- ORDINATION
-
BATHROOM
- HOME
Search
White glue for wood M-54 Unifix Quilosa
UNIFIX M-54 is a general purpose white glue for jobs related to wood in industrial sectors such as furniture manufacturing, decoration and construction. The great versatility of UNIFIX M-54 also allows it to be used in repairs and DIY work at home.
Related Products ( 16 other products in the same category )
Description
Adhesive based on an aqueous dispersion of modified vinyl polyacetate.
Technical data
- Appearance: White fluid fluid.
- Viscosity: Brookfield RVT. Sp 6, 20 rpm, 23ºC 11,500 ± 1,500 mPa.s
- Open time: 20 - 25 minutes
(200 micron film on fiber agglomerate at 23ºC and 65% relative humidity)
- Minimum film formation: 5 - 7 ºC
- Shear strength: According to EN 205
- In 1 hour 6.5 - 8.5 N / mm2
- In 24 hours 10 - 12 N / mm2
- In 7 days (EN 204 D1)> 12 N / mm2
Applications
UNIFIX M-54 is a general purpose white glue for jobs related to wood in industrial sectors such as furniture manufacturing, decoration and construction. The great versatility of UNIFIX M-54 also allows it to be used in repairs and DIY work at home.
Properties
UNIFIX M-54 forms an opaque, hard and tenacious film that provides strong and durable joints.
Indications of use
The surfaces to be glued must be adjusted, clean, dry and free of dust and grease. The humidity of the wood should be from 8 to 12% maximum. Higher degrees of humidity can influence the setting of the glue.
GLUING:
Apply UNIFIX M-54 on one of the sides to be joined manually by mediumnte brush, trowel or spatula, or mechanically by means of gluing roller type BARBERAN, BURCLE, SALGO, etc.
PRESSING:
For the realization of pressing presses can be used to assemble or traditional common cats. In case of using plate presses, the pressing conditions are: p>
Press | Time (minutes) | Temperature | Pressure (Kg / cm2) strong> |
Cold dishes | 90 - 180 | 23 º C td> | 3 - 5 |
Hot dishes | |||
Sapelli plate 0.6 mm Stratified 1 mm | 1 - 2 1 - 3 | 90 - 110 90 - 110 | 3 - 5 3 - 5 |
This time may vary depending on the materials as well as the environmental conditions of temperature and humidity.
Data sheet
- Kind of product:
- Adhesive
- Diluent / Cleaning:
- Water
- Type Application:
- With a brush or spatula
- Danger for transport:
- Innocuous, without restrictions
- Open work time
- 20-25 min
- Adhesive application mode
- 1 side
Specific References
- ean13
- 8411729060640
No customer questions for the moment.