Glass fiber reinforced putty 5Kg Alber Cover

Description

It is a mixture of different components paste, reinforced with fiberglass, designed to cover difficult cracks and prevent the reappearance of them. Fill, arm and seal fissures and cracks in plaster, cement or wood surfaces, even in plastic paints.

Technical data

• White color
• Ph: 8-8.5
• Thickness: Up to 3 mm. Per layer
• Adhesion:> 5 kg / cm2
• Performance: 1.2 kg / m2 on a surface of 1 mm thick
• Setting time: without limit
• Drying time: 24 hours per mm thickness

Preparation

Product in paste ready to use.

Application

It can be applied to trowel or spatula on the support without effort. If imperfections remain, it can be reviewed after a time between 2 and 8 hours, depending on the thickness of the layer. If there are some edges left, it can be easily sanded. When dried, an elastic and hard surface is obtained.

Application advice

It can be applied directly on exterior and interior backgrounds, always hard, dry and clean. Do not wet the supports before application. In case of deep cracks, widen and eliminate dust. Next fill. It is applied on plaster, cement, wood ...