High quality lubricant based on Teflon for the treatment of metal and synthetic parts. High penetration capacity Suitable for use on parts that are under a long or high force and temperature load (-50 ° C to + 250 ° C). Repels water and dirt PTFE offers long-lasting protection against friction and wear. Very good mechanical and thermal stability.
Teflon in Spray PTFE 400 ML Soudal
8,95€VAT included
High quality lubricant based on Teflon for the treatment of metal and synthetic parts. High penetration capacity Suitable for use on parts that are under a long or high force and temperature load (-50 ° C to + 250 ° C). Repels water and dirt PTFE offers long-lasting protection against friction and wear. Very good mechanical and thermal stability.
Related Products ( 3 other products in the same category )
Product description h3>
PTFE Spray is a high quality lubricant based on PTFE for the treatment of metal and plastic parts.
Technical data h3>
- Base: Mixture of mineral oils with PTFE.
- Consistency: Liquid li>
- Density: Ca. 0.82 g / ml
- Viscosity: 210 cST at 20 ° C / 18.5 cSt at 100 ° C
- Flash point: 270 ° C
- Welding test of 4 balls at extreme pressure (ASTM D2596): 2000 kg li>
- Washable in water at 80 ° C: 2.09% li>
- Solubility in water: Insoluble
- Volatile organic compounds (VOC): 80%
- Temperature resistance: -40 ° C → 250 ° C
- Application temperature: 5 ° C → 30 ° C
Properties
- Lubrica
- Reduces friction and wear li>
- Resistant to rust and corrosion
- Water-resistant li>
- Does not contain silicones
- For indoor and outdoor use
- The spray can be used at any angle (360 °)
Applications
- For use on parts that are exposed to intense or prolonged forces (-50 ° C to 250 ° C).
- Great penetration capacity. li>
- Repels water and dirt
- PTFE offers long-term protection against friction and wear.
- Very good mechanical and thermal stability.
- For use on machines, roller bearings, shafts, pinions, conveyor belts, profiles of rubber linings ...
Application Method
Surfaces must be cleaned, degreased and dried. Shake the can well before use. Spray it at a distance of approximately 20 cm from the object. To obtain the best result, apply the spray while moving parts are moving, if possible.
* If you want more information about this product, you can download the technical sheet in the "ATTACHED" tab.
18782
2 Items
Data sheet
- Kind of product:
- Lubricant
- Place of application
- Interior and Exterior
- Maximum temperature of use
- 30ºC
- Danger for transport:
- Prohibited Air Transportation
No customer questions for the moment.
Your Question has been successfully sent our team. Thanks for question!
Ask a question
hide form