Equipment and Tools
Especially suitable for interior walls and ceilings by drip properties that characterize this tissue demidamente drained. To paint all kinds of small areas or inaccessible. NOT INCLUDED ROD.
Brush for toughened gotelé patches. P>
quick coupling high performance and throughput. The rear spring not cause throttling. With ULTRA-FLO valve for minimal pressure drop. Exterior manufactured in nickel plated brass. Very high robustness.
Pneumatic quick fitting made from hardened steel (carbonitrided) plug. rustproofing.
Replacement of roller for coatings and coatings with plastic paints and enamels to the water, in all types of surfaces, disguising with the finish unequal walls or in poor condition. With its application you get a chopped or coarse grain depending on the density of the paint used.
NCS color chart Selection 980 colors. This letter is a very standardized color chart for degradation and is used by all manufacturers in the world to make any type of paint, whether in enamels, plastic paints, industrial paints, etc.
Hot melt gun. Includes 2 gift bars. p>
Preassembled "fly" 3M autofiltrante (FFA1P2), ready to use and designed for maximum simplicity and safety in use, with 2 charcoal filters of large surface that minimize breathing resistance. Mask type A satellite valve has low resistance that facilitates venting and prevents the accumulation of heat inside the mask.
Half mask 3M 7500 Series is designed for maximum comfort level for the user. Its patented exhalation valve facilitates breathing, increases the life of the mask and makes cleaning easier. Facepieces half mask 3M ™ 7500 Series are used in combination with two filters of gases, vapors or particles. It does not include filters, prefilters or retainers.
Filters 5911 3M particles protect against solid and liquid particles P1R are suitable for full-face masks Half masks 3M and 3M 6000 series and 7000 series requires a 3M Retainer filters 501. The filters are presented in blister packs of two units .
Filters 5925 3M particles protect against solid and liquid particles P2R are suitable for full-face masks Half masks 3M and 3M 6000 series and 7000 series requires a 3M Retainer filters 501. The filters are presented in blister packs of two units .
Filters 6055 3M vapors Class 2 protect against organic vapors with 65 point above boiling, they are suitable for full-face masks Half masks 3M and 3M series 6000 and series 7000. According to EN 14387: 2004+ A1: 2008.
Filters 6059 3M vapors protect against organic vapors with 65 point above boiling, inorganic gases, acid gases and ammonia Class 1 are suitable for full-face masks Half masks 3M and 3M series 6000 and series 7000. According to standard EN 14387: 2004+ A1: 2008.
Prefilter retainer for use in particulate filters 5000 series and filters for gases and vapors of series 6000. P>
Blue waterproof, high weight adhesive tape, especially recommended for outdoor applications where surfaces are exposed to UV rays and moisture. Also suitable for shipyard applications. Especially recommended for metal, aluminum, glass, wood and plastic surfaces. 28 days of clean outdoor retreat.
Support plate for sanding machines with a diameter of 150 mm and adhesion by velcro. The plate comes with the 15-hole system for optimum dust extraction. The plate comes with several adapters to be compatible with various systems on the market such as 3M Eléctrica, 3M Elite, Festo, Rupes and Indasa.