High quality acrylic solvent for acrylic resin mixed with any solvent: bilayer paintings, rigging, primers, varnishes, etc. slow drying so it is ideal for workplaces where very hot or hot seasons like summer. It is also ideal for slow drying when incidents arise boiled or powdered dried in the air.
Solvents, Adhesives and Others
Additive to accelerate drying of standard 2-component VOC lacquers and standard 2-component lacquers. The additive can also be used to shorten the drying times of the 2-component filler. A100 increases the chemical reactivity of the products in which it is used, so that it shortens the waiting times to carry out sanding or polishing operations, or to start reassembling the parts.
Special Agent developed to reduce the brightness of paints 1K or 2K. It is added by 20-50% depending on the type of finish required. After adding the delustering agent, less thinner (reducer) is required.
Unsaturated polyester resin based on orthophthalic acid and standard glycols, dissolved in styrene. It is pre-accelerated and contains a thixotropic agent. It has a moderate reactivity and low viscosity. It is well suited for manual lamination techniques and projection. During rolling, easily permeates the reinforcing materials and non-sag of the inclined laminates.
The gel coat ISO NEO is a gel coat based on unsaturated polyester resin isophthalic neopentyl glycol. Its specific formula gives this gel, very good mechanical strength and good resistance to hydrolysis and aging outside. The Top Coat version comes wax for use as a topping.
The acetone (CH3COCH3) is a volatile, colorless solvent highly pure product in the cumene process - phenol, is completely miscible in water and most organic solvents such as alcohols, ethers, hydrocarbons, esters, ketones liquid and fatty acids. It has a characteristic odor and is highly flammable.
Fiberglass chopped strand mat that remain cohesive through an emulsifier 300 g / m2. Especially recommended for the construction of structural composites and laminates for waterproofing parts polyester resins and vinyl ester. It is also widely used for building molds with the same resins. It is not recommended to work with epoxy resins.
The gel coat ISO NEO is a gel coat based on unsaturated polyester resin isophthalic neopentyl glycol. Available in almost all colors of the RAL and NCS. Its specific formula gives this gel, very good mechanical strength and good resistance to hydrolysis and aging outside. The Top Coat version comes paraffin for use as a topping.
Fiberglass mat type of cut yarns that are held together thanks to an emulsifier of 100 g / m2. Especially recommended for the construction of structural laminates for composite parts and waterproofing with polyester and vinyl ester resins. It is also very used for the construction of molds with the same resins. It is not recommended to work with epoxy resins.
Fiberglass mat type of cut yarns that are held together thanks to an emulsifier of 150 g / m2. Especially recommended for the construction of structural laminates for composite parts and waterproofing with polyester and vinyl ester resins. It is also very used for the construction of molds with the same resins. It is not recommended to work with epoxy resins.
Double-sided adhesive tape 50mm x 10m, designed for fixing artificial turf to the floor, with special effectiveness on hard surfaces such as tiles. It can be used in both indoor and outdoor installations, offering a professional finish, so it can be used for DIY, decorating, and gardening installations.
Aluminum tape with solvent based acrylic adhesive and protective silicon paper. Among its most common applications are the protection and sealing of pipes and ducts. Its use is directed to the industry of heating, construction, air conditioning, refrigeration, extractors and construction.
Adhesive tape of polyethylene coated fabric with white adhesive of natural rubber. It is a durable adhesive tape and adaptable to any type of surface, with good resistance and adhesion, both indoors and outdoors. Thanks to its composition, it is a very versatile tape, used in many applications: masking, sealing, packaging, binding and many more. This adhesive tape is indicated both for professional use and in DIY projects. At industrial level it is used mainly in the sealing of pipes or conduits.
Black PVC plasticized adhesive tape, with pressure sensitive rubber adhesive. Easy to use, with good sealing properties and excellent elongation. It has a good resistance to the exterior and oils, acids and alkalis.
Special solvent for dissolving chlorocaucho paints such as chlorocaucho pool paints, chlorocaucho floor paints and chlorocaucho enamels. Solvent mixtures of aromatic hydrocarbons, esters and alcohol
High quality solvent for use and dissolution of varnishes, enamels and polyurethane lacquers. Aromatic hydrocarbon solvent, ester and ketones.
Solvent that is added when the speed of drying must be slowed down and the wettability must be increased. Especially suitable for applications with roller, brush or spray gun in enamels and polyurethane varnishes, especially when application temperatures are high. Improves brochability and leveling of the product.
Universal nitrocellulose solvent without antivevel of very good quality suitable for dilution and cleaning of all types of paints.