quick coupling high performance and throughput. The rear spring not cause throttling. With ULTRA-FLO valve for minimal pressure drop. Exterior manufactured in nickel plated brass. Very high robustness.
Pneumatic quick fitting made from hardened steel (carbonitrided) plug. rustproofing.
RAL K7 Classic color chart 213 colors
NCS color chart Selection 980 colors. This letter is a very standardized color chart for degradation and is used by all manufacturers in the world to make any type of paint, whether in enamels, plastic paints, industrial paints, etc.
Preassembled "fly" 3M autofiltrante (FFA1P2), ready to use and designed for maximum simplicity and safety in use, with 2 charcoal filters of large surface that minimize breathing resistance. Mask type A satellite valve has low resistance that facilitates venting and prevents the accumulation of heat inside the mask.
Half mask 3M 7500 Series is designed for maximum comfort level for the user. Its patented exhalation valve facilitates breathing, increases the life of the mask and makes cleaning easier. Facepieces half mask 3M ™ 7500 Series are used in combination with two filters of gases, vapors or particles. It does not include filters, prefilters or retainers.
Filters 5911 3M particles protect against solid and liquid particles P1R are suitable for full-face masks Half masks 3M and 3M 6000 series and 7000 series requires a 3M Retainer filters 501. The filters are presented in blister packs of two units .
Filters 5925 3M particles protect against solid and liquid particles P2R are suitable for full-face masks Half masks 3M and 3M 6000 series and 7000 series requires a 3M Retainer filters 501. The filters are presented in blister packs of two units .
Filters 6055 3M vapors Class 2 protect against organic vapors with 65 point above boiling, they are suitable for full-face masks Half masks 3M and 3M series 6000 and series 7000. According to EN 14387: 2004+ A1: 2008.
Filters 6059 3M vapors protect against organic vapors with 65 point above boiling, inorganic gases, acid gases and ammonia Class 1 are suitable for full-face masks Half masks 3M and 3M series 6000 and series 7000. According to standard EN 14387: 2004+ A1: 2008.
aggressive polishing liquid for use in refinished, in removing scratch marks caused by abrasives during the polishing process. It can also be used to remove traces of rust, scratches, scratches produced by washing tunnels, etc. on original paintings.
Extra Fine polish developed specifically for modern scratch resistant paints to give a relatively high breaking attached to a high gloss. To use both repainted and original paintings, eliminates sanding scratches that have been produced to eliminate other flaws such as dust spots or orange peel. P>
Smooth polishing pad Perfect-it III system 3M. Special polishing paste for Fast Cut Plus Perfect-it III (50417). Diameter 150 mm, plate with Velcro pad 125 mm.
The cleaning product Autoglym engine is a product of aqueous, strong base, solvent, non-corrosive, multi-surfaces, used in engine parts, wheels and machinery. The spray formula with brushing and hosing quickly dissolves grease, grime and dirt own vehicle traffic on all surfaces.
The rubber and vinyl cleaner is a spray product for plastic and rubber components of your car that restores the original color to the surface and leaves a transparent protective layer. Over time, the sun can bleach, dry and crack those surfaces, but the rubber and vinyl cleaner ensures that these areas remain protected.
For leather surfaces, tough but sensitive to chemicals, kept in perfect condition, it is necessary to use special products. Leather Cleaner has a neutral pH formulation and can be safely used on all interior leather surfaces. Not damage the imitation leather.
Dissolves brake dust from chrome rims, aluminum alloy without damaging them. It contains a special blend of biodegradable substances and solvents that offers a formula that quickly dissolves brake dust and dirt corrosion caused by traffic that remains embedded in the wheels.