Paintings and Industrial Products
quick coupling high performance and throughput. The rear spring not cause throttling. With ULTRA-FLO valve for minimal pressure drop. Exterior manufactured in nickel plated brass. Very high robustness.
Pneumatic quick fitting made from hardened steel (carbonitrided) plug. rustproofing.
Aliphatic polyurethane varnish two component acrylic based solvent medium for direct application on any support or on polyurethanes or properly prepared media Epoxies. The varnish is ideal stop Acripol decorative solutions for maximum strength on galvanized iron, brass, wood, etc.
Superesmalte acrylic-polyurethane, two-component crosslinked aliphatic polyurethanes that meets the highest requirements in decoration. Ideal stop decorative solutions maximum strength on galvanized iron, brass, wood, etc. As boats finish (above the waterline), cowlings, etc.
RAL K7 Classic color chart 213 colors
NCS color chart Selection 980 colors. This letter is a very standardized color chart for degradation and is used by all manufacturers in the world to make any type of paint, whether in enamels, plastic paints, industrial paints, etc.
Preassembled "fly" 3M autofiltrante (FFA1P2), ready to use and designed for maximum simplicity and safety in use, with 2 charcoal filters of large surface that minimize breathing resistance. Mask type A satellite valve has low resistance that facilitates venting and prevents the accumulation of heat inside the mask.
Half mask 3M 7500 Series is designed for maximum comfort level for the user. Its patented exhalation valve facilitates breathing, increases the life of the mask and makes cleaning easier. Facepieces half mask 3M ™ 7500 Series are used in combination with two filters of gases, vapors or particles. It does not include filters, prefilters or retainers.
Filters 5911 3M particles protect against solid and liquid particles P1R are suitable for full-face masks Half masks 3M and 3M 6000 series and 7000 series requires a 3M Retainer filters 501. The filters are presented in blister packs of two units .
Filters 5925 3M particles protect against solid and liquid particles P2R are suitable for full-face masks Half masks 3M and 3M 6000 series and 7000 series requires a 3M Retainer filters 501. The filters are presented in blister packs of two units .
Filters 6055 3M vapors Class 2 protect against organic vapors with 65 point above boiling, they are suitable for full-face masks Half masks 3M and 3M series 6000 and series 7000. According to EN 14387: 2004+ A1: 2008.
Filters 6059 3M vapors protect against organic vapors with 65 point above boiling, inorganic gases, acid gases and ammonia Class 1 are suitable for full-face masks Half masks 3M and 3M series 6000 and series 7000. According to standard EN 14387: 2004+ A1: 2008.
High quality acrylic solvent for acrylic resin mixed with any solvent: bilayer paintings, rigging, primers, varnishes, etc. slow drying so it is ideal for workplaces where very hot or hot seasons like summer. It is also ideal for slow drying when incidents arise boiled or powdered dried in the air.
Cleaner for use on surfaces to be repainted. Suitable for the first step of degreasing, to remove vehicles that are to be painted tar residue, grease and silicones. The product can also be used for the initial degreasing composite plastics. It lets is used for degreasing metal surfaces untreated.
Coating of two components 100% solids, formulated on the basis of solvent-free epoxy resins, for indoor or outdoor application with cover. Together with its corresponding hardener, formulated on the basis of non-yellowing resins, they give rise to a product of great adhesion, which forms a film of excellent hardness and tenacity, without any tendency to yellow. Top quality coating, based on special epoxy resins and high strength pigments.
UHS express surfacer that has been formulated with totally innovative resins and indicated in partial quick repairs. It stands out for its covering and excellent sanding thanks to its hardening speed, and the vehicle can be sanded at 20-25 min. From the application without the need for energy expenditure of heat in the cabin or IR systems, which can generate significant savings in the painting cycle, as well as an increase in productivity.
ULTIMATE GENERATION two-component Low Density Polyester putty that stands out for its easy application, fineness, absence of pores, high performance, filling power and above all, for its ease of sanding. Adhesion on steel, galvanized and electrozincado and previously sanded aluminum.