Paintings and Products for Nautical
quick coupling high performance and throughput. The rear spring not cause throttling. With ULTRA-FLO valve for minimal pressure drop. Exterior manufactured in nickel plated brass. Very high robustness.
Pneumatic quick fitting made from hardened steel (carbonitrided) plug. rustproofing.
Aliphatic polyurethane varnish two component acrylic based solvent medium for direct application on any support or on polyurethanes or properly prepared media Epoxies. The varnish is ideal stop Acripol decorative solutions for maximum strength on galvanized iron, brass, wood, etc.
Superesmalte acrylic-polyurethane, two-component crosslinked aliphatic polyurethanes that meets the highest requirements in decoration. Ideal stop decorative solutions maximum strength on galvanized iron, brass, wood, etc. As boats finish (above the waterline), cowlings, etc.
RAL K7 Classic color chart 213 colors
NCS color chart Selection 980 colors. This letter is a very standardized color chart for degradation and is used by all manufacturers in the world to make any type of paint, whether in enamels, plastic paints, industrial paints, etc.
Preassembled "fly" 3M autofiltrante (FFA1P2), ready to use and designed for maximum simplicity and safety in use, with 2 charcoal filters of large surface that minimize breathing resistance. Mask type A satellite valve has low resistance that facilitates venting and prevents the accumulation of heat inside the mask.
Half mask 3M 7500 Series is designed for maximum comfort level for the user. Its patented exhalation valve facilitates breathing, increases the life of the mask and makes cleaning easier. Facepieces half mask 3M ™ 7500 Series are used in combination with two filters of gases, vapors or particles. It does not include filters, prefilters or retainers.
Filters 5911 3M particles protect against solid and liquid particles P1R are suitable for full-face masks Half masks 3M and 3M 6000 series and 7000 series requires a 3M Retainer filters 501. The filters are presented in blister packs of two units .
Filters 5925 3M particles protect against solid and liquid particles P2R are suitable for full-face masks Half masks 3M and 3M 6000 series and 7000 series requires a 3M Retainer filters 501. The filters are presented in blister packs of two units .
Filters 6055 3M vapors Class 2 protect against organic vapors with 65 point above boiling, they are suitable for full-face masks Half masks 3M and 3M series 6000 and series 7000. According to EN 14387: 2004+ A1: 2008.
Filters 6059 3M vapors protect against organic vapors with 65 point above boiling, inorganic gases, acid gases and ammonia Class 1 are suitable for full-face masks Half masks 3M and 3M series 6000 and series 7000. According to standard EN 14387: 2004+ A1: 2008.
aggressive polishing liquid for use in refinished, in removing scratch marks caused by abrasives during the polishing process. It can also be used to remove traces of rust, scratches, scratches produced by washing tunnels, etc. on original paintings.
Extra Fine polish developed specifically for modern scratch resistant paints to give a relatively high breaking attached to a high gloss. To use both repainted and original paintings, eliminates sanding scratches that have been produced to eliminate other flaws such as dust spots or orange peel. P>
Self-polishing patent with high load of copper and other particular additives, suitable for hot seas and in difficult conditions. Its "antifouling" power gives a good result of 12 months with thicknesses of 100-120 microns dry. Ideal for working speed boats of wood, iron and fiberglass with speed up to 20 knots.