Water-repellent invisible to the colorless water S40 Titan Pro
A colorless and transparent solution that does not form a film or alter the natural appearance of the support or its breathability (microporous). Protects from the penetration of rainwater. For its application in facades and stone walls, brick in exposed construction, concrete and in general the set of neutral and alkaline materials commonly used in construction. Applied to saturation, it prevents efflorescence that, by capillarity, emerges from the facades, in areas with contaminated groundwater levels close to the ground. It helps keep the facades clean of dust and dirt. Prevents the growth of fungi and algae.
Related Products ( 2 other products in the same category )
Description
A colorless and transparent solution that does not form a film or alter the natural appearance of the support or its breathability (microporous). Protects from the penetration of rainwater. For its application in facades and stone walls, brick in exposed construction, concrete and in general the set of neutral and alkaline materials commonly used in construction. Applied to saturation, it prevents efflorescence that, by capillarity, emerges from the facades, in areas with contaminated groundwater levels close to the ground. It helps keep the facades clean of dust and dirt. Prevents the growth of fungi and algae.
Technical data
- Nature: Alkyl-polysiloxane emulsion
- Finishing: Does not alter the appearance of the support
- Color (UNE EN ISO 11664-4): Colorless
- Density (UNE EN ISO 2811-1): 1.00 - 1.04 Kg / l
- Performance (UNE 48282): 3 - 10 m² / l according to surface
- Application Methods: Brush, roller and gun
- Dilution: Ready to use
- Utensils Cleaning: Water
- Application Conditions, HR 80% + 10 ºC - + 30 ºC. Do not apply with rain forecast in the next few hours
- Solid Volume (UNE EN ISO 3233-3): 4 - 5%
* Variations of temperature, humidity, thickness, dyeing or type of support, etc., can cause changes in drying, performance or other properties.
How to use
GENERAL RECOMMENDATIONS:
Stir well in the container. The surfacesto paint must be clean, dry and consistent. Only on vertical or highly inclined surfaces will maximum efficiency be achieved with this type of treatment. Waiting times before applying the product, according to weather or construction conditions: After rain: wait 24 hours. After cleaning with water under pressure: wait 3 days. Newly worked works or new work: wait 1 month.
HIS PERFICIES NOT PREPARED: On crumbly, dusty or inlaid surfaces, it is necessary to remove elements with poor adhesion with a brush. It is advisable to fill with putty, mortar, etc. fissures of more than 0.5 m / m.
Data sheet
- Kind of product:
- Finishing paint or final coat
- Theoretical yield per hand (m2 / L):
- 6
- Diluent / Cleaning:
- Water
- Type Application:
- By brush, roller or gun
- Danger for transport:
- Innocuous, without restrictions
Specific References
- ean13
- 8414800410006
No customer questions for the moment.