Textiles and Vinyl Black Spray Rust-Oleum 400 mL

Description

Flexible paint designed to restore color vinyl and tissues. Nature of vinyl for maximum durability for use in car seats, seat upholstery, furniture and other similar uses. Ideal for material vinyl, faux leather and fabrics.

How to use

1. Apply several thin layers with several minutes of difference between them.

2. Stir vigorously advance and minimum spray for 1 minute after moving the ball inside note.

3. Also stirring occasionally during paint application Apply at room temperature between 10 and 32 ° C and below 85% relative humidity.

4. Spray with uniform, parallel and equidistant from the part or support (30 cm. Approx.) To be decorated.

5. Clean wet paint spray nozzle with after the container upside down for several seconds

Surface Preparation

Surfaces should be consistent, dry and free of dust, grease, oils, waxes and any dirt.

If applied on paints, enamels or varnishes old, insure properadhesion by pre-sanding.

Cover surrounding areas to protect them from spray and mist spray.

Technical data

- Type of finish: Bright

- Yield: 2.5 m2 approx. in total and with a proper cover (2-3 layers). This performance may vary depending on the porosity and texture of the support to decorate.

- Application: Interior

- Drying: 10 minutes to touch. 15 minutes between layers. Total drying 24 hours.

- Packaging: 400 ml