Enamel Water Tile Titan White 750 ml

Description

Multi-surface satin-finish water-based enamel, easy to apply. 2 in 1, no primer is needed on a wide variety of substrates. Very fine finishes and softness to the touch, great hardness and resistance to scratches, scratches, soaps, liquor stains, juices, oil, etc ... Very washable, with anti-mold preservative and very low odor. Does not yellow. Not suitable for immersion, nor zones with constant condensation.

Recommended Uses of Titan Tile Painting

Enamel for direct application on ceramic tiles. Very suitable for painting walls, doors and furniture of kitchens and bathrooms, radiators, PVC and copper pipes, etc. Do not use for floor tiles or countertops.

Technical characteristics

- Natural: Acrylic

- Appearance: Satin

- White color

- Drying at 23 ° C 60% RH: 1 - 1.5 hours

- Repainting at 23ºC 60% RH: From 4 hours

- Number of hands: 2

- Yield: 8 - 12 m² / Lt per hand (Approximate).

- Application tools: Brush and foam roller.

- Cleaning utensilS: Water.

- Dyeing: Universal Tincture or Titan Tinting System

How to use

General recommendations:

Stir well in the container. The surfaces to be painted must be clean, dry and primed properly. Remove any remaining dirt, grease, poorly adhered rust and coatings using household bleach diluted 9: 1, solvent or stripper, as required.

Unprepared Surfaces:

Tiles:Thoroughly clean the surface with diluted household bleach. Grease or contamination with silicone can affect enamel adhesion. To ensure better adhesion, the joints should be rubbed with a brush, in order to remove any dirt, mold, etc.

Remove the silicone joints before painting and reseal once the enamel is applied.

Wait a minimum of 5 days to use the water zones, after this period can be washed surface with mild detergent. Do not use abrasives, scouring pads or brushes as they will scratch the enamel.

Ceramic porous, rigid PVC, copper, melamine: Apply directly 1 or 2 layers of Enamel Water Tiles Bathrooms and Kitchens

In environments of high humidity, the sanding of the support with sandpaper P280 greatly favors adhesion.

Maintenance of already painted surfaces in good condition:

Wash, gently sand and apply directly 1 or 2 coats of Enamel Water Tiles Bathrooms and Kitchens

Maintenance of already painted surfaces in poor condition:

Remove completely and proceed as on unprepared surfaces.