Paint Radiators White Oxirite 750 mL
White enamel based on synthetic non-yellowing resins, suitable for domestic water heating radiators and for hot water piping. It resists perfectly, without yellowing, at temperatures up to 150ºC intermittently, or 80ºC continuously. Its white color is permanent and its specific formulation does not yellow, even at these high temperatures.
You might also like
Product Description
Radiator Paint is a white enamel based on synthetic non-yellowing resins, suitable for domestic water heating radiators and for hot water piping. It resists perfectly, without yellowing, at temperatures up to 150ºC intermittently, or 80ºC continuously. Its white color is permanent and its specific formulation does not yellow, even at these high temperatures.
Features
- The main advantage is that, unlike other paints, Radiator Paint does not yellow when subjected to high temperatures.
- White satin permanent.
- Weak smell in the application. Once dry it does not smell.
- Great leveling and good brochability. It does not pick up.
- Great hiding power and high performance.
- Does not contain lead or chromates.
Fields of application
For domestic heating radiators for water and for hot water pipes.
Preparation of the surfaces
The supports must be clean and dry before glazing. It is necessary to remove any remaining dirt, grease or old varnish badly adhered, using solvent or paint stripper if necessary. A previous sanding of the surface increases the roughness of the same, favoring the adherence of the product.
How to use
Radiators should be off and cold before painting. Do not use on electric or oil radiators. Remove the enamel very well. Once the surfaces have been cleaned and cleaned, apply one coat of Radiator Enamel with a brush, roller or spray gun. Applying with a gun, add White esprit or universal solvent, up to a maximum of 15%. Do not dilute if applied with a brush or roller. To leave a more uniform finish, a second coat can be applied, after 16 hours as a guideline, depending on the environmental conditions. It is recommended to sand lightly between layers. Wait the next day before turning on the radiator, and, once lit, ventilate the room well for 12 hours.
Data sheet
- Kind of product:
- Unprimed finish
- Degree of Brightness
- Satin
- Theoretical yield per hand (m2 / L):
- 14
- Number of recommended hands:
- two
- Sanding between layers
- Soft sanding
- Dry to Touch at 23ºC and 60% RH
- 4 - 6 a.m.
- Time for repainting at 23ºC and 60% RH
- 4 pm
- Diluent / Cleaning:
- Universal Solvent
- Number of Components
- 1 component
- Type Application:
- By brush, roller or gun
- Place of application
- Interior Only
- Paint Iron or Steel
- Directly
- Paint Aluminum, Brass or Copper
- Directly
- Paint Galvanized Steel
- Directly
- Paint Already Painted Surfaces
- A smooth sanding and painting directly
- Danger for transport:
- Prohibited Air Transportation
No customer questions for the moment.