3D Epoxy Thick Coat 100% Solids 700 G + 300 G
100% solid two-component coating, formulated based on solvent-free epoxy resins, for indoor or outdoor covered application. Together with their corresponding hardener, they give rise to a highly adherent product, which forms a film of excellent hardness and toughness. Top quality coating, based on epoxy resins with cycloaliphatic amine.
You might also like
Related Products ( 2 other products in the same category )
Description
100% solid two-component coating, formulated based on solvent-free epoxy resins, for indoor or outdoor covered application. Together with their corresponding hardener, they give rise to a highly adherent product, which forms a film of excellent hardness and toughness. Top quality coating, based on epoxy resins with cycloaliphatic amine.
Recommended uses
Product especially indicated for decorative projects and transparent finish on designs, photo murals, panoramic views or previous vinyls, also in bathrooms. The options for decorating floors with this product are as varied as desired, adjusted to the tastes and imagination of each person. Very versatile material in decoration, which provides a totally crystalline three-dimensional effect. Use for the treatment of floors in which it is desired to obtain a continuous coating, without joints and insulating, both from cold and humidity. It is resistant to chemicals, antibacterial and very easy to clean. It is not advisable to apply outdoors without covering, due to possible chalking (whitening) of the resin and loss of gloss. It also provides a long-lasting self-leveling effect. It can also be applied on different surfaces for decoration such as wood and tiles.
features
- Very resistant to impact,rubbing and dirt on pavements.
- They can be applied up to 5cm thick per layer.
- Excellent filling power and elasticity.
- Very resistant to carbonation on concrete and cement.
- Flexible to the natural expansions and contractions of the support.
- Resistant to the action of fats and oils, solvents, alkaline and acid solutions.
- Great impermeability to water.
- Maximum resistance to scratches and bumps.
- Excellent durability and decorative appearance.
Technical data
- Brightness (60º geometry): Bright
- Transparent color
- Volume solids: 100%
- Hardener: 100% solids 3D epoxy catalyst
- Mixing ratio: 700g: 300g / 2.4Kg: 1Kg / 9.6Kg: 4Kg by weight
- Pot life: 8 hours at 23 ° C
- Diluent: Product to use
- Recommended thickness: According to desired effect
- Overcoating interval: Minimum: 48h at 23 ° C / Maximum: 96h at 23 ° C
- Temperature: 10 ° C - 30 ° C
- Relative humidity: Maximum: 80%.
Data sheet
- Kind of product:
- Resin
- Dry to Touch at 23ºC and 60% RH
- 24-48 hours
- Number of Components
- 2 components
- Mix ratio
- 5 parts of resin per 1 of catalyst
- Life of the mixture at 23ºC and 60% RH
- 60-80 min
- Type Application:
- A Spatula
- Place of application
- Interior and Exterior
- Paint Iron or Steel
- Directly
- Paint Wood
- Directly
- Paint Fiber Polyester
- Directly
- Danger for transport:
- Prohibited Air Transportation
No customer questions for the moment.