Topographic Marker Spray 500ml Titan
High-quality, fast-drying, high-contrast acrylic fluorescent paint that, once dry, allows quick visual location. It dries quickly and allows, if necessary, re-marking at any time. To achieve the highest fluorescence, it is much more efficient to apply the Marking Paint on surfaces that are as white as possible.
Related Products ( 5 other products in the same category )
Description
High-quality, fast-drying, high-contrast acrylic fluorescent paint that, once dry, allows quick visual location. It dries quickly and allows, if necessary, re-marking at any time. To achieve the highest fluorescence, it is much more efficient to apply the Marking Paint on surfaces that are as white as possible. The special design of this marker allows it to be used in a vertical and inverted position, therefore it can mark floors, walls and ceilings. Innovative safety dosing cap with blocker to prevent unwanted actuation. The marks will be eliminated over time, due to the photodegrading effect of UV rays from sunlight, as well as by rubbing or use of the marked area.
Fields of application
For the provisional marking of works in Construction, laying pipes, on roads, in industry, non-permanent marking in forest exploitations, reference points in topographical signaling, tunnel ceilings, telecommunications, temporary marking of limits and areas in fields sports etc. It allows marking on stone, cement, iron, sand, earth, artificial grass (it is necessary to verify in advance that the type of grass resists this product without alteration), wood, cork, asphalt, plastic and the materials commonly used in construction. It can be applied on both dry and damp or wet surfaces.
Technical data
- Fluorescent Matte Finish
- Drying at 23ºC 60% RH (UNE 48301) 10 minutes
- Repainting at 23ºC 60% RH (UNE 48283) 30 minutes
- Application Conditions, RH<80% +10 ºC - +30 ºC
- Presentation 500ml.
How to use
GENERAL RECOMMENDATIONS:
Shake the spray vigorously for 1 minute after the mixing balls sound. The surfaces to be painted must be clean, dry and consistent. Protect surfaces that should not be painted. Make a test spray in an inconspicuous area.
precautions
Before using the product, carefully read the instructions on the package. For more information, consult the Safety Data Sheet. Store well-closed containers away from sources of heat and temperatures below zero. Conservation: 36 months in container
Data sheet
- Kind of product:
- Finishing paint or final coat
- Degree of Brightness
- Mate
- Time for repainting at 23ºC and 60% RH
- 30 min
- Type Application:
- Spray
- Place of application
- Interior and Exterior
- Danger for transport:
- Prohibited Air Transportation
- Drying time
- 10 minutes
Specific References
- ean13
- 8414800293715
No customer questions for the moment.