Fixa Soudal Exterior Mounting Adhesive

Description

Fixed Multimaterial Mounting Adhesive is a ready-to-use, solvent-based mounting adhesive based on synthetic rubber.

Technical specifications

• SBR Rubber Base
• Paste consistency
• Curing system Crystallization and physical drying
• Cure Speed * Hand tight in 20 minutes.
• Density Ca. 1.20 g/ml
• Temperature resistance** -20°C → 60°C
• Open time (23°C, 55% RV) * 15 min.
• Application temperature 5 °C → 25 °C

Properties

• Direct application to a substrate with a caulking gun
• universal use
• Suitable for gluing on uneven surfaces.
• It avoids the need to use screws and nails because it works instead.
• Waterproof
• Suitable for gluing polystyrene

Applications

• All kinds of gluing in assembly techniques.
• Stuck in the field of renovations.
• Bonded in the construction sector.
• Bonding of panels and cable trays.

Application Method

Apply the adhesive using a caulking gun and depositing equal dots or pearls, not too fine, every 15 cm and on one of the materials to be glued. Always apply adhesive to edges and corners. Bring both parts together and press them together; immediately, pull them loose and allow them to dry for 10-15 minutes. Then repeat the gluing and hit with a rubber mallet. Support him if necessary. Cleaning: With 90A adhesive cleaner. Repair: With the same material