Finish Protector Water Colorless W 20 L Iruxil

Product Description

Colorless finish. Its purpose is to protect and beautify all types of wood indoors. Enhances the natural beauty of wood. IRUXIL W is a water based decorative protective ready for use. In its formulation it contains fungicides and insecticides capable of providing an effective biological wood protection and fungi CARCOMA bluish agents.

Finish Protector Features Water

- Very easy application by brush, short nap roller and / or airbrush projection.

- Effective PROTECTion against the elements (weather).

- High elasticity and adhesion to wood (not cracks).

- High stability of color.

- Contains UV absorbers to protect the wood against sunlight (photodegradation)

- Fast drying even in tropical timber

- No odor during application

- Not flammable.

Technical Data

- Drying: 1-2 hours approximately to repaint hand

- Yield: 5-8 m2 (100 gr / m2 per coat).

- Number of hands: 2.

- Cleaning: Use water. Do not empty into drains.

How to use

- Support and preparation Applicable on all types of wood. However, in outdoor applications the use of questionable durability timber will be avoided. The timber must be free of dust and dirt and free of any coating of varnish or paint, in order to facilitate good penetration and adhesion of the product on the substrate. Do not apply to wood containing more than 15% humidity.

- Application: The product is ready for use. Shake to ensure color consistency. Apply 2 coats of 80-100 g / m2. For a better finish apply in the direction of the wood grain. Sand lightly between coats at intervals of 1-2 hours, avoiding application in cold and humid environments. If necessary, dilute with water.

- Maintenance: If over time with signs of degradation were observed, just lightly sand the surface in question and apply 1-2 hands IRUXIL W.