Primer to fix and seal surfaces of masonry that present a porous or pulverulent state (plaster, cement ...) and to fix or isolate paints to the glue or remains of them. It facilitates the application and adhesion of paints and plasters in aqueous dispersion. Does not hinder the perspiration of this type of surfaces. Ideal to apply in adverse weather conditions.
S20 Titan Pro Superpenetrating Fixing Primer
39,90€VAT included
Primer to fix and seal surfaces of masonry that present a porous or pulverulent state (plaster, cement ...) and to fix or isolate paints to the glue or remains of them. It facilitates the application and adhesion of paints and plasters in aqueous dispersion. Does not hinder the perspiration of this type of surfaces. Ideal to apply in adverse weather conditions.
You might also like
Related Products ( 8 other products in the same category )
Description
Primer to fix and seal surfaces of masonry that present a porous or pulverulent state (plaster, cement ...) and to fix or isolate paints to the glue or remains of them. It facilitates the application and adhesion of paints and plasters in aqueous dispersion. Does not hinder the perspiration of this type of surfaces. Ideal to apply in adverse weather conditions.
Technical data
- Nature: Acrylic copolymer
- Density (UNE EN ISO 2811-1): 0.80 - 0.85 Kg / l
- Performance (UNE 48282): Gypsum: 1.2 - 1.5 m² / l / Cement: 4 - 7 m² / l
- Drying at 23ºC 60% RH (UNE 48301): 30 minutes
- Repainted at 23ºC 60% RH (UNE 48283): 6 - 8 hours
- Application Methods: Brush and roller
- Cleaning of Utensils: Dissolvent Synthetic and Fatty
- Application Conditions, HR 80% -20ºC - +40ºC
- Flash Point (UNE EN ISO 3679): 37 ºC
- Solid Volume (UNE EN ISO 3233-3): 13 - 14%
- VOC (UNE EN ISO 11890-2) 2004 / 42IIA (h) (750/750) Max. VOC 700 g / l
- Presentation: 10 l and 4 l
* Variations of temperature, humidity, thickness, dyeing or type of support, etc., can cause changes in drying, performance or other properties.
How to use
GENERAL RECOMMENDATIONS:
Stir well in the container. The surfaces to be painted must be clean, dry and consistent. Apply one or 2 layers depending on the state of the surface. On surfaces in poor condition, clean all affected areas, removing all material that is not well adhered and cleaning all dirt and dust they might have and apply two coats of the undiluted primer.
21712
2 Items
Data sheet
- Kind of product:
- Primer
- Theoretical yield per hand (m2 / L):
- 5
- Dry to Touch at 23ºC and 60% RH
- 30 min
- Time for repainting at 23ºC and 60% RH
- 6 - 8 a.m.
- Type Application:
- With brush or roller
- Place of application
- Interior and Exterior
- Danger for transport:
- Innocuous, without restrictions
Specific References
- ean13
- 8414800409949
No customer questions for the moment.
Your Question has been successfully sent our team. Thanks for question!
Ask a question
hide form