Resin Tacky Moype Union Bridge
Product made of acrylic resin, specially formulated as primer to improve adhesion on non-absorbent surfaces, favoring the anchoring of the materials to be placed on the support. With excellent adhesion, great waterproofing power and resistance to alkalinity
You might also like
Related Products ( 10 other products in the same category )
Description
Product made of acrylic resin, specially formulated as primer to improve adhesion on non-absorbent surfaces, favoring the anchoring of the materials to be placed on the support.
Technical data
- Nature: Styrene-acrylic Emulsion to Water
- Solid content: 35% ± 1
- Appearance: Milky liquid
- Density: 1 + - 0.05 g / cc
- Application temperature: Between 5 and 30ºC
- pH: 7 - 8
- Cleaning tools: Water
Fields of application
On substrates with low absorption before the application of all types of materials commonly used in construction (screed, cement glue, facades plasters, leveling pastes and masonry mortars). Indoor and outdoor use.
Features
- Excellent adhesion
- Waterproofing power
- Resistance to alkalinity
- Easy application
- Solvent-free
- Long working time (up to a week approximately), not requiring the application of mortar or other construction material immediately.
How to use
Apply directly on the support with brush, roller or gun (clean with water immediately after use) p>
The supports must be sound, solid, clean and free of dust, grease and release agents, grouts or weakly adhered materials. Your best results are logran on smooth supports and with little superficial absorption (brick, concrete, etc.)
Shake the product very well and apply without diluting (neither with water nor with any other product) p>
It can be applied on wet surfaces, but not waterlogged. Apply "wet on wet", preventing it from forming film. Do not allow it to dry completely.
The application of the mortar on this bond bridging resin, can be carried out in a period of time ranging from 30 minutes to a maximum week, after having applied it, depending on the applied layer and the ambient temperature and humidity. After that time, it is possible to lose its stickiness by accumulating dust or other materials on the resin, preventing it from working properly.
Nor use on plastic or metal materials.
* If you want more information about this product, you can download its technical sheet in the tab "ATTACHMENTS".
Data sheet
- Kind of product:
- Primer
- Diluent / Cleaning:
- Water
- Number of Components
- 1 component
- Type Application:
- By brush, roller or gun
- Place of application
- Interior and Exterior
- Danger for transport:
- Innocuous, without restrictions
Specific References
- ean13
- 8433459007573
No customer questions for the moment.