Chemical Cue CA 1400 Vinylester 280ML Soudal

Description

2-component sealing and anchoring mortar, for fixing rods, frame bars, iron to concrete, anchor sieves, etc., both on solid and hollow supports, concrete, hollow brick, natural stone, plasterboard ...

Technical data

• Vinilester Base
• Stable paste consistency
• Chemical curing system
• Density 1.65 g / cm3
• Temperature resistance (fully cured) Up to + 80o C - in short exposures up to + 120o C
• Dynamic modulus of elasticity 3,300 N / mm2
• Maximum torsional stress 56 N / mm2
• Maximum compression stress 108 N / mm2 Technical Characteristics:

(*) These values may vary due to temperature, humidity, surfaces and forms of application.

Applications

Anchoring heavy loads on solid materials. Medium loads on hollow materials. Anchoring without limitation near the edges. It can be used as a concrete repairman.

Profits

• Recommended for making anchors in hollow wall elements, bricks, masonry and concrete.
• Economical fixing resin
• Medium load applications
• Use in dry and wet conditions
• Close edge distance and small spacing
• Suitable as filling for holes and cracks
• Styrene free with low odor
• Ideal for indoor use

Application conditions

• Application temperature: -5o C and + 35o C.
• Cleaning: Before hardening with acetone. After mechanically hardening.
• Repair: with the same product.

* If you want more information about this product, you can download its technical sheet in the "ATTACHMENTS" tab.