Semi-gloss epoxy floor paint + catalyst
Polyamide epoxy paint solvent of two components. Provides good adhesion, resistant to splashes and intermittent chemical spills, it has a high resistance to scratching, abrasion and wear, washable even with detergents and rapid commissioning. Almost all RAL colors (including metallic) and NCS. It includes the catalyst.
Product customisation
Don't forget to save your customization to be able to add to cartYou might also like
Related Products ( 4 other products in the same category )
Description
Polyamide epoxy paint solvent of two components. Provides good adhesion, resistant to splashes and intermittent chemical spills, it has a high resistance to scratching, abrasion and wear, washable even with detergents and rapid commissioning. Available in almost all RAL colors (including metallic) and NCS. It includes the catalyst.
How do I select the color?
1. The first thing you have to do is download the RAL or NCS (DOWNLOAD tab just above) to see what color you like.
2. Once you have chosen the color reference points. In the space that says "Color" Product customization of paragraph (a little higher) writes color reference and hit save. For example, RAL 1001 or S 5005-Y20R (letter NCS). There are colors that are not available from the RAL, are the 3024, 3026, 3028, 6037, 6038 and fluorescent.
3. Select the desired amount of product.
4. Finally, add the product to cart and you're done. You can check on the cart that is included your product and the selected color.
Application surfaces
Especially suitable as protective finishand indoor decorative concrete pavements in parks, factories, workshops, etc. It is advisable to use abroad.
Technical characteristics
- Yield: About 6 m / Lt (depending on color support).
- Layers: Two layers.
- Tools: brush or roller.
- Catalyst: 4 parts product to 1 part of catalyst by weight.
- Pot life: 8 hours at 20 ° C
- Dilution: Epoxy Thinner 0-10%
- Repainting: 24 hours at 20 ° C
For more information see the data sheet.
Data sheet
- Kind of product:
- Finishing paint or final coat
- Degree of Brightness
- Semi-shine
- Theoretical yield per hand (m2 / L):
- 8
- Number of recommended hands:
- two
- Sanding between layers
- It is not necessary
- Dry to Touch at 23ºC and 60% RH
- 10 a.m.
- Time for repainting at 23ºC and 60% RH
- Minimum 24 hours, maximum 15 days
- First layer application
- Dilute between 10-15% so that it penetrates well into the support
- Time for maximum hardness
- 7 days
- Diluent / Cleaning:
- Epoxy solvent
- Number of Components
- 2 components
- Mix ratio
- 4 parts of paint per 1 of catalyst
- Life of the mixture at 23ºC and 60% RH
- 8 a.m.
- Type Application:
- With brush or roller
- Place of application
- Interior Only
- Paint Iron or Steel
- Directly
- Paint Concrete or Cement
- Directly
- Paint Fractated Concrete
- Open pore and very dilute first coat
- Paint Already Painted Surfaces
- Eliminate if the paint is of one component
- Danger for transport:
- Prohibited Air Transportation
No customer questions for the moment.