Deck Water Protector 20 L Iruxil Deck
Impregnating the colored water, able to provide an excellent insight into woods of tropical origin. Successfully replaces certain oils that nourish the wood but will not provide effective protection against solar radiation and therefore against degradation. Its ultimate goal is to protect and beautify all types of wood, basically outdoor conditions.
You might also like
Related Products ( 8 other products in the same category )
Product Description
Aqueous impregnating colored, capable of providing an excellent insight into woods of tropical origin. Successfully replaces certain oils that nourish the wood but will not provide effective protection against solar radiation and therefore against degradation. Its ultimate goal is to protect and beautify all types of wood, basically outdoor conditions. Enhances its natural beauty, coloring it and protecting it against graying caused by photodegradation.
Features Protector Soil Water
- Very easy to applytion brush, short nap roller and / or airbrush projection.
- Effective protection against the elements (weather).
- Waterproof and nourishes wood.
- It has good elasticity and adhesion.
- High stability of color to the sun's UV action
- Fast drying even in tropical timber
- No odor during application
- Not flammable.
Technical Data
- Drying: 1-2 hours approximately to repaint hand
- Yield: 12-16 m2 (80 g / m2 per coat).
- Number of hands: 2.
- Cleaning: Use water. Do not empty into drains.
How to use
- Support and preparation. Applicable on all types of wood suitable for outdoor flooring (Ipe, Cumaru, etc). The wood must be clean of dust and dirt and free of any layer of varnish or paint in order to facilitate good penetration and adhesion of the product on the substrate. Do not apply to wood containing more than 15% humidity.
- Application: The product is ready for use. Shake to ensure color consistency. Apply 2 coats of 60-80 g / m2. For a better finish apply in the direction of the wood grain. Sand lightly between coats at intervals of 1-2 hours. Avoid application in cold and humid environments. If necessary, dilute with water.
- Maintenance: Simply perform a gentle grinding operation, clean debris and proceed with the application of a new coat of product. It is not flammable and meets the strictest regulations regarding health and the environment.
Data sheet
- Kind of product:
- Finishing paint or final coat
- Degree of Brightness
- Satin
- Theoretical yield per hand (m2 / L):
- 12
- Number of recommended hands:
- two
- Sanding between layers
- It is not necessary
- Dry to Touch at 23ºC and 60% RH
- 1-2 hours
- Time for repainting at 23ºC and 60% RH
- 1-2 hours
- Diluent / Cleaning:
- Water
- Type Application:
- By brush, roller or gun
- Place of application
- Interior and Exterior
- Paint Wood
- Directly
- Paint Already Painted Surfaces
- A smooth sanding and painting directly
- Danger for transport:
- Innocuous, without restrictions
- advice
- The darker the color, the more it protects the sun. The satin also protects more than the matt.
- Viscosity Ford Cup 4 (seconds)
- 12
Specific References
- ean13
- 8428092521821
No customer questions for the moment.