Teak Oil Industrial Xylazel
Mixture of natural oils and resins, specially chosen tonourish and enrich wood. The teak oil Xylazel is particularly suitable for maintenance of exotic and tropical woods such as teak or iroko. Industrial size 25 L to 200 L. For smaller sizes of 750 ml and 4 L see product Teak oil Xylazel.
You might also like
Related Products ( 7 other products in the same category )
Product Description
The oil Xylazel Teak is a mixture of natural oils and resins, specially chosen to nourish and enrich the wood. Indicated for the maintenance of exotic and tropical woods such as teak or iroko.
Effectiveness of teak oil Xylazel
- Treated wood regains its natural balance and original qualities of brightness, texture and color.
- The drying trend is corrected, recovering the natural oils that the wood loses over time
- The trend is corrected in the graying wood exposed to sunlight.
- The wood is protected from stains and dust.
Features teak oil Xylazel
- Very nutrient. Mitigates the effects of aging, especially patents on bare wood exposed to sunlight.
- The texture is silky and smooth, natural color.
- The application is simple and excellent penetration into the wood.
- Maintenance is simple. You do not need sanding or stripping, just cleanWood and directly apply a new coat of product.
Fields of application
It is used for maintenance and renewal of wood and furniture, especially teak and exotic tropical woods and unvarnished.
Performance
With Xylazel Teak Oil can be painted between 7 and 10 m2 per liter per coat depending on how the wood absorb the product.
Surface preparation
Before applying the product, remove stains, dust, varnish and paint. To do this, wash with detergent and water, rinse and let dry. If necessary, one removers are used to remove paints and varnishes old.
Application
Shake the bottle well. The application of teak oil is simple, clean wood directly without filler. Treated wood should be clean, with no stains or dust. In varnished wood or painted above, must be removed or paint varnish before treatment. The container is shaken and abundant labor product directly on wood is applied. Passtwo approximately twenty minutes, remove the excess with a cloth and apply a second coat. Leave to dry for a period of 3 to 4 hours, depending on environmental conditions. In media where product performance is unknown, a test was conducted prior to application.
Cleaning of tools:Solvent.
For more information read sheet, available in download tab.
Notice
The colors are approximate and may vary depending on the computer screen you are using.
Data sheet
- Kind of product:
- Finishing paint or final coat
- Degree of Brightness
- Mate
- Theoretical yield per hand (m2 / L):
- 10
- Number of recommended hands:
- two
- Sanding between layers
- It is not necessary
- Dry to Touch at 23ºC and 60% RH
- 3-4 hours
- Time for repainting at 23ºC and 60% RH
- 30 min
- Diluent / Cleaning:
- Universal Solvent
- Type Application:
- By brush, roller or gun
- Place of application
- Interior and Exterior
- Paint Wood
- Directly
- Paint Already Painted Surfaces
- A smooth sanding and painting directly
- Danger for transport:
- Dangerous terrestrial / maritime, airborne
- advice
- Once the product has been applied, remove the excess that has not absorbed the wood with a dry cloth
Specific References
- ean13
- 8414956000052
No customer questions for the moment.