Menu
-
CAR PAINTINGS
-
PAINT AT HOME
- Varnishes for interior wood
- Exterior and marine varnishes for wood
- Exterior wood and deck stains and teak oils
- Enamels for Wood
- Furniture, kitchen cupboards and doors painting
- Chalk colour paint and chalk spray paint
- Anti termites treatments and woodworms protection
- Primers for Wood
- Wood putties
- Clean and Renovate Wood
- Furniture repair
-
PROFESSIONAL PAINT
-
BOAT PAINTING
-
CRAFTS
-
GARDEN
- COLD AND HEAT
-
HARDWARE
-
TOOLS
-
ELECTRICITY
-
PLUMBING AND GAS
- DECORATION
- ORDINATION
-
BATHROOM
- HOME
Search
Cola for PVC 125 ml Soudal
Ready-to-use tail specially developed to make fast connections of hard PVC materials (PVC pipes, fittings, gutters, etc). With great adhesion and resistant to cold and hot water.
Related Products ( 16 other products in the same category )
Description h3>
Adhesive of great ease of application that provides strong joints and resistant to the attack of aggressive products and aging.
Technical data h3>
- Color: translucent li>
- Density (20ºC): 0.97 - 0.99 g / ml li>
- Viscosity: 900 - 1200 cp
- Flammability: easily flammable li>
Application h3>
It is a solder adhesive for joining pipes and rigid PVC materials, of special interest for pressure systems
How to use
Clean and degrease the surfaces to be glued with our PVC degreaser. Mark the depth of insertion of the end of the tube into the sleeve in order to apply the adhesive only to the surface to be glued.
Apply a thin, even layer of adhesive to the sleeve and then a thicker layer to the end of the previously bevelled tube. Carry out the union immediately without making any turn keeping it pressed for a few minutes. Remove excess adhesive with a cloth.
The gluing operation should be done quickly from the application of the adhesive.
The bonding must not be subjected to efforts or movements before the first 10 minutes.
Depending on the ambient temperature and the aeration of the joint, the setting of the adhesive takes place approximately 4 hours after its application. In installations that must overcome pressures higher than 1.5 atm. Wait at least 24 hours before putting them into service.
The strength of the glue can be estimated until the material breaks and not the joint p>
* If you want more information about this product, you can download its technical sheet in the tab "ATTACHMENTS".
Data sheet
- Kind of product:
- Adhesive
- Danger for transport:
- Innocuous, without restrictions
Download
No customer questions for the moment.