Xylazel Lasur Sol Mate
Regular price
€16.25
-40%
Price
€9.75
Product for the curative and preventive treatment of wood against woodworms and termites. Colorless, low odor solvent base. Xylazel Carcomas Plus is also presented in a format for application by injection for the curative treatment of small woodworm.
Curative and preventive protector to eliminate woodworm . Xylazel Carcomas is formulated with a solvent base, being colorless and de-flavored.
Xylazel Woodworms Plus is used for the preventive protective treatment of wood against woodworms and termites and as a curative treatment against woodworms indoors (class 1 wood). Use for the general public and professionals indoors for furniture or other wooden objects such as doors and windows that do not suppose a surface greater than 3 m2.
It is also used as a curative treatment in dry and humid interiors (wood of use class 1 and 2) in all types of wood, solid or plywood, old or new.
For the curative treatment by injection against small woodworm in furniture and other wooden objects of similar size, the product is also presented in packages with a device in the form of a cannula.
Ideal for art objects, sculptures, frames, etc.
Xylazel Carcomas Plus is a product that provides effective protection to the wood, without modifying its natural color, since as a deep impregnation of the peniswork on it, guaranteeing its effectiveness.
- Protective primer against wood-destroying insects (woodworms and termites).
- Healing effect against woodworms.
- It does not form a film.
- Once dry, it admits any dye or finish.
- Very easy to apply.
- Also available in containers to be applied by injection to eradicate small woodworm from furniture.
Xylazel Carcomas Plus is a product that gives effective protection to wood, without modifying its natural color, since as a base impregnation it penetrates it guaranteeing its effectiveness.
- Protective primer against wood-destroying insects (woodworms and termites).
- Healing effect against woodworms.
- It does not form a film.
- Once dry, it admits any dye or finish.
- Very easy to apply.
- Also available in containers to be applied by injection to eradicate small woodworm from furniture.
Color shades:Colorless
Density at 20ºC: approx. 0.8 g / cm3
Viscosity: Very fluid
Drying times: 24 hours approx. under normal environmental conditions. We recommend, when deemed necessary, a test before proceeding to the final application. Corrosion behavior: It does not attack metals or glass. It does not cause any oxidation. Once dry, the wood can come into contact with plastics and bituminous materials
Before using the product, read the label or the instructions for use and follow all the instructions given. Remove paints and varnishes, by mechanical or chemical stripping. Clean old or new wood. Adequately protect plastics and bituminous materials. The application must be carried out within a defined area (indoors or outdoors under a roof). Use only indoors outdoors or in well-ventilated areas. Wood treated with the biocidal product must be permanently protected from moisture and rain in the period between impregnation and installation of the treated wood.
Freshly treated wood should be stored under cover and / or on a rigid and waterproof floor to avoid direct losses to the ground or water. Any loss must be collected forits reuse or disposal.
Dilution: Should not be diluted. Shake before using.
Application tools: Brush or brush according to the fields of application. In the case of the product for application by injection, the liquid is introduced directly with the cannula into the holes made by the woodworm.
New woods: For a preventive action, apply the product with a brush until reaching the recommended dose. The primer with Xylazel Carcomas Plus and the first coat of paint can be applied in the workshop before taking the wood to the job site. The wood must be clean, dry and sanded.
Previously varnished and painted wood: After the total removal of the old layers of paint, all surfaces must be properly treated with Xylazel Carcomas Plus. For direct application by injection, connect the open end of the injection tube, which is attached to the container, to the opening of the pump button valve. Insert the other end of the injection tube (with the hollow needle) into the holes in the wood. Press the pumping mechanism 5-7 times forming a continuous and fine stream of liquid without dripping, with an approximate result of 0.4 to 0.5 mL, until the required dose is reached and clean any excess product that may be produced with a clothdried. For more information on the use of the cannula, consult the indications given on the package.
Data sheet
Specific References
No customer questions for the moment.