Finish Protector Water Colors Iruxil W 20 L
Water-based protective finish colored with iron oxides specially selected. Its purpose is to protect and beautify all types of wood, either indoors, either in outdoor conditions. Enhances the natural beauty of wood, coloring it and protecting it against graying. With fungicides and insecticides agents.
You might also like
Related Products ( 8 other products in the same category )
Product Description
Colored finish with specially selected iron oxides. Its purpose is to protect and beautify all types of wood, either indoors, either in outdoor conditions. Enhances the natural beauty of wood, coloring it and protecting it against graying. IRUXIL W is a water based decorative protective ready for use. In its formulation it contains fungicides and insecticides capable of providing an effective biological wood protection and fungi CARCOMA bluish agents.
Finish Protector Features Water
- Very easy application by brush, short nap roller and / or airbrush projection.
- Effective protection against the elements (weather).
- High elasticity and adhesion to wood (not cracks).
- High stability of color.
- Contains UV absorbers to protect the wood against sunlight (photodegradation)
- Fast drying even in tropical timber
- No odor during application
- Not flammable.
Technical Data
- Drying: 1-2 hours approximately to repaint hand
- Yield: 5-8 m2 (100 gr / m2 per coat).
- Number of hands: 2.
- Cleaning: Use water. Do not empty into drains.
How to use
- Support and preparation Applicable on all types of wood. However, in outdoor applications the use of questionable durability timber will be avoided. The wood must be clean of dust and dirt and free of any layer of varnish or paint to objectto facilitate good penetration and adhesion of the product on the substrate. Do not apply to wood containing more than 15% humidity.
- Application: The product is ready for use. Shake to ensure color consistency. Apply 2 coats of 80-100 g / m2. For a better finish apply in the direction of the wood grain. Sand lightly between coats at intervals of 1-2 hours, avoiding application in cold and humid environments. If necessary, dilute with water.
- Maintenance: If over time with signs of degradation were observed, just lightly sand the surface in question and apply 1-2 hands IRUXIL W.
Data sheet
- Kind of product:
- Finishing paint or final coat
- Theoretical yield per hand (m2 / L):
- 6
- Number of recommended hands:
- two
- Sanding between layers
- It is not necessary
- Dry to Touch at 23ºC and 60% RH
- 1-2 hours
- Time for repainting at 23ºC and 60% RH
- 1-2 hours
- Diluent / Cleaning:
- Water
- Type Application:
- By brush, roller or gun
- Place of application
- Interior and Exterior
- Paint Wood
- Directly
- Paint Already Painted Surfaces
- A smooth sanding and painting directly
- Danger for transport:
- Dangerous terrestrial / maritime, airborne
- advice
- The darker the color, the more it protects the sun. The satin also protects more than the matt. The colorless matt does not work for exterior
- Viscosity Ford Cup 4 (seconds)
- 52
- Cash against Carcoma
- Yes
- Effective against Fungi
- Yes
- Maximum Observed Resistance
- 8 years
Specific References
- ean13
- 8428092521418
No customer questions for the moment.