Polish 3M Perfect-it III Ultrafine SE 1L
You might also like
Related Products ( 6 other products in the same category )
Ultrafine SE (antihologramas) is a very fine car polish to remove swirl marks and holograms on repainting and original paintings after the polishing process.
- Ultrathin removes small scratches that form with the application of polish 80349 (which causes the effect of holograms).
- It provides free finish holograms even on black cars.
- Easy to handle and easy to clean.
- For use after polishing step (080,349).
Ultrafine SE is a very fine polish to remove minor scratches and holograms zones repainted and paintings of origin. 3M Perfect It III Ultrafine SE is designed to quickly remove remaining minor scratches and holograms formed during polishing car paint, reaching a high gloss finish.
You can apply the polish with a polishing machine pneumatic or electric machine (1400-2000 rpm) equipped with a specific extrablanda beret for Ultrafina refª 50388 (150 mm) or 50389 (200 mm).
Instructions for use
- Apply enough product on the surface to work in an area of approximately 0.5 m2. For best results use enough product to leave a thin layer on the surface of paint applied after three or four passes of the polisher.
- Start the polishing process with medium pressure to remove marks left by the polish, then apply slight pressure to get a better finish.
- This product is designed to be kept moist and not get caught in the beret. After three or four passes with the buffer, delete the final residue with a soft cloth specific to Ultrafine.
- Keep beret used in a plastic bag to prevent contamination by airborne dust.
Directions for use
- Use after the process of polishing and buffing.
- Do not use directly after using the product Ultrafine grinding (50417), Ultrafina is not aggressive enough to remove those marks.
- If you are working on an original surface to remove scratches from a tunnel wash polishing product use 3M Perfect It 80349 to remove scratches and then use Ultrafina SE for a bright and scratch-free finish.
- To clean the product using an absorbent cloth and avoid using cloths of synthetic fibers (polpropileno).
- If large areas should be polished before removing excess product, apply high gloss protector 09,377 Perfect it III or the 3M Polish Rosa protector to facilitate removal of the waste and provide additional protection. Li>
- Kind of product:
- Type Application:
- Danger for transport:
- Innocuous, without restrictions