Primer Primer acrylic 100% S10 Titan Pro

Description

High penetration primer for sealing surfaces that have a very porous, powdery state (plasters, plasters), etc. It facilitates the adherence of paints to the support and avoids variations in the appearance of the finish due to absorption differences.

Technical data

• Nature: Pure acrylic
• Density (UNE EN ISO 2811-1): 1.03 - 1.07 Kg / l
• Performance (UNE 48282): 6 - 10 m² / l variable according to surface porosity
• Drying at 23ºC 60% RH (UNE 48301): 1 hour
• Repainted at 23ºC 60% RH (UNE 48283): 4 hours
• Application Methods: Brush, roller and gun
• Thinner: Water
• Utensils Cleaning: Water
• Application Conditions, HR 80% + 10 ºC - +30 ºC. Do not apply with rain forecast in the next few hours
• VOC (UNE EN ISO 11890-2) 2004/42 / IIA (h) (50/30) Max. VOC 29 g / l
• Presentation 5 l and 1 l

* Variations of temperature, humidity, thickness, dyeing or type of support, etc., can cause changes in drying, performance or other properties.

How to use

GENERAL RECOMMENDATIONS:

Stir well in the container. The surfaces to be painted must be clean, dry and consistent. Apply 1 or 2 coats depending on the state of the surface. On surfaces in poor condition, clean all affected areas, removing all material that is not well adhered and cleaning all dirt and dust they may have. On very porous surfaces apply a first coat diluted in equal parts with water, and before drying apply a second layer undiluted.